Ect sensor 2006 mazda tribute

SOURCE: running hot

replace the therostat ( most likely )

and the radiator cap

SOURCE: 2001 Mazda Tribute (3.0 L) Heater motor functions on high only

Its the Blower Resistor....If it was the switch, it probably wouldn't work at all....But the Resistor will give you those symptoms, of working on high med or low

SOURCE: I have an 02 Mazda Tribute with a leaking Radiator

1. Drain coolant
2 Remove lower splash shields
3. Disconnect the lower radiator hose and the high pressure transaxle line
4. Lower the vehicle
5. Disconnect the transaxle return line
6. Disconnect the upper radiator hose and degas hose
7. Position the hood latch assembly out of the way
8. remove the 2 bolts and the center support
9 remove the 2 top bolts retaining the cooling fan to the radiator
10. remove the upper radiator support brackets, and remove the radiator from the vehicle
11. To install, reverse the removal procedure

toneman2121

• 775 Answers
• Posted on Apr 01, 2010

SOURCE: Where is Bank 1 Sensor 2 located on a 2004 Mazda

bank 1 is the bank of cylinders closest to the firewall. the sensor will be located along the exhuast from that side after the catylitic converter

SOURCE: change brakes on 2006 mazda tribute

mcdevito75 here, That is a heavy duty job even for a good, good weekend mechanic, The truth is, as you know, you can run into a dozen problems that can and will leave you haveing to tow your vehicle to the shop. First you would need the TOOLs in American and Metric sizes as both American and Metric Nuts and Bolts are included on your Mazda, Then a Hydraulic jack that can hold at least 1 corner of the Mazda off the ground and--be able to with-stand the rocking motion as you did the job, Then you"d have to be concerned with parts, suppose you get the wrong parts, suppose you find a frozen or broken part, such as a brake hose, now you would have to bleed the brake system too. It"s very smart you are willing to do your own brakes BUT EVEN WISER TO KNOW, TO MANY PROBLEMS ASSOCIATED WITH THE JOB. BEST BET, look for a sale on Brakes with-in you area, The tools, time and effort even if the job went smoothly, would cost about the same as the shop. Look for a sale, and have the shop do your brakes.