I have a 1992 Toyota Camry V6 and I replaced the head gaskets. I have the head and the valve worked done. When the engine is hot there is clocking noise inside the valve cover and if its park and try to rev up the engine and let the gas pedal go that is when I hear the cloking noise but if it's on high rpm it don't have that noise.I checked the valve clearance and adjusted it by shimming . I repeat this process cause it did not do nothing on the first time. Besides all that noise my car runs fine and has a good gas millage. Please help.
SOURCE: 1997 Camry Valve Cover Gasket Replacement
Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.
SOURCE: Cam bearings
this is a major overhaul , if you don't do it right you will damage many things
SOURCE: 1992 Toyota Camry Rough Idle
start by pulling hose off egr valve see if idles smoother almost instantly
may be oil feed to cylinder head replace gasket
SOURCE: Toyota 1jz engine,are they hydraulic or shim
Shims and Valve clearance cold
: 0.15-0.25mm (in)
0.25 0.35mm (ex)
241 views
Usually answered in minutes!
×