Starter wire connections need to know where they are hooked up or how many go on the starter
SOURCE: hooking up wires to battery, solenoid, altornater and starter
hi from the uk if you look at startermotor solenoid you will see two large threaded terminals with nuts? and a third small terminal either spade or round terminal ok? now you should see thet one of large terminals already has a metal or braides strap secured to it and the actual startermotor body? LEAVE THIS ALONE the other large terminal is the one you fit the positive+ lead to from battery also there should be another lead to also attach to same terminal this one supplies power for vehicles electrics etc ensure you secure these with nut ok? now the third small spade or post terminal you will hav a thin wire nearby ?this attaches to thisterminal on its own on solenoid this wire is the one that activates starter when ignition is turned to key start position ok? as for interior light not working ? try again when you complete the above also make sure bulb is ok? ps! before you reconnect starter wires ensure the earth/ground lead is disconnected from battery and when reconnecting battery connect positive lead first then the earth lead or if you try other way you will have sparking from pos lead as you try connecting to battery hope this info is clear instructios for you to follow and wish you luck best wishes from england
SOURCE: NEED WIRING DIAGRAM FOR 2002 PT CRUSIER STARTER
Hello chk614, my name is JShreader. Thank you for choosing fixya.com.
Here is a picture showing the Wires connecting to the Starter...
If you are looking for the formal Wiring Diagram...see below...
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!
SOURCE: Wiring Diagram 1998 Chevy S-10 starter replacement
The starter has one large cable from the battery positive, and a wire that goes to the solenoid (Part of the starter) that becomes hot when the key ignition is turned to start. This also passes through the neutral safety switch. (So it wont start in gear) Not sure if this is what you need, a little vague.
SOURCE: I'm trying to install a remote starter in my car and need a wiring diagram to hook it up
does anyone have wiring diagram for 2005 jeep liberty ready remote car starter
SOURCE: Starter relay connections
if your starter engages but wont spin check to make sure the starter housing is making good contact on the bell housing or it wont ground out
223 views
Usually answered in minutes!
×