My head gaskets gone and the car makes a nasty knocking noise

torque hyundai accent Questions & Answers - Fixya

www.fixya.com > Forum > Tags

Torque specifications for cylinder head 2000 hyundai accent Are you aware that ... cover gasket on my 1997 Hyundai Accent GLS (engine code G4EH, 1.3L).

Hyundai Alpha engine - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Hyundai_Alpha_engine

WikipediaG4EH in a 1999 Hyundai Accent L ... lb·ft (132 N·m) at 4000 rpm, although some websites quote the torque rating as being 97 lb·ft (132 N·m) at 2700 rpm. ... 1992 Hyundai S-Coup? LS specifications - Carfolio.com · 1992 Hyundai S-Coup? GT ...

[PDF]AERA Torque Specs

www.aera.org/uploads/4/3/7/7/43776611/aera-torquespecs.pdf
AERA Torque Specs. 500 Coventry Lane, Suite 180, Crystal Lake, IL 60014. Toll-free Technical Hotline: 1-888-324-2372 (1-88-TECH-AERA). 815-526-7600 fax ...

.

Torque Specifications - AutoZone

www.autozone.com/.../Hyundai.../Specifications/Torque-Speci...

AutoZoneTorque Specifications. Print. Specific to: Hyundai ... Specific to: Hyundai Accent2006. Hyundai Azera 2006. Hyundai Elantra 2006. Hyundai Sonata 2006.

Club Accent Qu?bec • Consulter le sujet - hyundai motor s

sounds like your lifters. have you checked the oil. I put lucas oil in my customers cars after I change the oil. it may help

This is a major repair requiring the complete disassembly of the top end of the motor. I'd recommend at least that you purchase the appropriate repair manual from Chilton, Haynes etc before you attempt this.

Check the fuse panel. If you cannot hear the window motor running when you hold the button to roll them back up then you have probably blown a fuse.

There is no such thing as a dual overhead gasket or a single overhead gasket.... there is, however, the existance of a dual overhead 'cam' and a single overhead 'cam'...

Please restate your question

hello send e-mail to [email protected] and i will forward them to you, Regards, Lee

The head gasket has gone so pressure builds up in the cooling system and forces water out of the overflow

You need someone to take the head off , skim it and fit a new gasket

they should have towed it!!! ,sounds like it was overheating should be filled ,checked for leaks and repaired including a new thermostat and make sure electric cooling fans ok,,as long as head gasket is not involved..good luck

if u suspect a problem with your brakes inspect them or have them inspected! when they start making noise usually its time for new ones.

i think you should get the nozzles and pump serviced
did you check the piston sleeves and the crank, main bearings when you changed the gasket?