SOURCE: Cabin Air Filter - 2004 Mitsubishi Endeavor (Where?)
IT IS IN BEHIND THE GLOVE COMPARTMENT YOU HAVE TO TAKE IT OUT BY UNSREWING AND START FROM YOUR RIGHT SIDE
SOURCE: need to know where the Idle Air control valve is
i have a 1997 what is the motor size like 2 liter? it should be on the t/b closes to the fire wall.
SOURCE: Have a 1996 Mitsubishi Galant
You'll have to remove the throttle body to replace the idle air control (IAC) valve. First, disconnect the negative ground cable from the battery. Then remove the vacuum line and air duct intake. Then disconnect the IAC and throttle position sensor (TPS) electrical connections. Remove the coolant hoses that are connected to the IAC. Disconnect the throttle cable from the throttle body. Now, remove the 4 bolts that hold the throttle body to the manifold and remove. Be careful with the gasket located between the throttle body and manifold and replace it in the same position. On your clean work surface, turn the throttle body over and remove the 4 phillips head screws holding the IAC to the throttle body. Clean the parts with a dry cloth but do not use solvents on the IAC or TPS. That's it!
2,380 views
Usually answered in minutes!
×