Question about 1999 Porsche 911 Carrera

2 Answers

How To Program Porsche 911 Remote Keyless Alarm Key Fob

I have a 99 Porsche 911. I replaced the batteries on the fobs from both sets of keys i have and they each stopped working at the same time. The red light doesn't flash or anything. I don't want to pay the $260 each i was quoted by the dealer to replace them. Can I repair or reprogram them myself? Thanks, Josh White

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 3 Answers

Make sure + side of battery is facing up in your key then place key in ignition hold down button 1 your door lock unlock button for 20/30 sec. If not try in driver door unlock car manually with key turned hold down button 1 for 20/30 sec. hope this helps it works for me.

Posted on Apr 21, 2013

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

I have the same problem with my 1995 Porsche 911. I was quoted $260 for the key fob and $70 to program it. Sheesh!

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reprogram keyless entry car alarm transmitter


you did not specify vehicle that fob represents but the following links should help you ------if the fob has auto start need to bring to dealer for reflash -----
Program remote key fob for your car simple and easy steps Need to Re Program Key Fob GM Ford Honda Right Here

May 28, 2016 | Cars & Trucks

1 Answer

Is there a way to reset keyless entry for 04 endeavor?


Search Results

    2004 Mitsubishi Endeavor Key Fob Remote Programming ...

    blog.keylessentryremotefob.com/.../04/2004-mitsubishi-endeavor-key-fo...
    Apr 25, 2013 - 2004 Mitsubishi Endeavor Key Fob Remote Programming Instructions ... you might have visit us at Keylessentryremotefob.com You can also ...

    Mitsubishi - Free Keyless Remote Fob Entry programming .

    How To Replace Mitsubishi Endeavor Key Fob Battery 2004 ...

    ? 2:04
    www.youtube.com/watch?v=yeQRdre7O0Q
    Oct 31, 2014 - Uploaded by Keyless Entry Remote Inc
    ... will show you How To Replace Mitsubishi Endeavor Key Fob Battery 2004 2005 To Order This Remote ...

Nov 01, 2015 | Cars & Trucks

1 Answer

Can I program the car to recognixe the key fob.


1996 Roadmaster

  1. Locate the programming connector located in the LH trunk. Trim may have to be pulled back to access programming connector. ( Connector has black/white wires leading up to it and it is not connected to anything.)
  2. Jump programming connector terminals. Leave terminals jumped unitl step 6.
  3. System should now lock and unlock doors to indicate programming mode has been entered.
  4. Press any button on keyless remote once. System should now lock and unlock doors, indicating successful programming of keyless remote.
  5. Repeat step 4 for additional remote or other existing keyless remote. NOTE: A maximum of only two Keyless Remotes can be programmed.
  6. Remove programming connector jumper wire to exit programming mode.
  7. Test remote(s).

Oct 19, 2015 | 1996 Buick Roadmaster

2 Answers

Key fob won't work even after changing battery, can only open and lock car using key, alarm won't shut off and keeps ringing


retry replacing battery new doesnt mean cant be defective if it is good than fob needs a relearn different cars have different relearn that you can perform but if the fob has other features such as start that will have to be done at dealer ----
Free Keyless Remote Fob Entry programming instructions procedures for all... look up your vehicle and will have instructions one how to program fob --will also tell if need to be done at dealer

Aug 02, 2015 | Cars & Trucks

1 Answer

1999 porsche 996 replaced key fob battery disconnected battery now trunk releses are locked and cant access battery.How do you open frt trunk manually


Assuming the car battery is ok (if not, buy a male to male cigarette lighter at the auto store and connect to another car until charged enough to unlock the doors...but don't try to crank the ignition!). The trunks won't open if the battery went dead with the alarm set because arming the alarm physically locks the releases.

Sounds like the key code is switched off because you replaced the key fob battery. Try unlocking the car manual with the key in the door lock. Then switch the ignition on to reactive the keyless entry. If this does not work, you might also try pressing the fob unlock button with the key in the door lock until the dash led flashes.

Jun 10, 2010 | 1999 Porsche 911 Carrera

1 Answer

Porsche 2000 911 Carrera. Key fob problem


each vehicle is different put the key in the ign. turn key on press door lock/unlock at the same timehold button for 10 sec see if any lights on the dash inst. panel blink if they do that means that the key fob was programmed to your vehicle i recommend a new key fob this will give you definative instructions on how to reprogram your fob

May 04, 2010 | 2000 Porsche 911 Carrera

3 Answers

My Porsche Key fob no longer unlocks the doors


Insert key into door barrel or ignition lock and turn key, whilst doing this press the unlock/lock button, the led on the dash should flash to indicate this has initialised the key to the car, then remove key and test operation of remote. If this fails then a new remote plus coding to the car by your dealership is needed

Feb 16, 2010 | 2005 Porsche 911

1 Answer

How to program a Remote Starter Key FOB for 2008 Grand Prix


fob programing is done by turning key off on 8 times listen for clicks then press both buttons after that key on off one more time if not look on net for fob manual

Aug 12, 2009 | 1998 Porsche 911 Carrera

Not finding what you are looking for?
1999 Porsche 911 Carrera Logo

4,368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...