I have a 1991 Jeep Wrangler with a 5speed 6cylinder 4wd and I was driving home and went to shift from 5th to 4th gear and it got stuck in 4th and will not come out the shifter is hard and will not move any where? I have no idea about these transmissions or what type it is except it is a stock 1991 jeep wrangler. The Jeep does drive and move. I took the shifter off and looked down in the hole but all you see is a big rod and a square with a circle in it i assume the shifter goes through to shift. I dont see any plates or openings other then that to look inside at the linkages or anything. Any help anyone can give me or some information on the transmissions in these would help a ton.
I had the same problem, but in first gear. What I did to free it up, with the shifter out of the transmission, looking down into the hole you will see two linkages side by side with a slot in each. The trouble is the linkage got out of sink. What you do is put a large screw driver into (shifter lever) slot and try to move them (they are hard to move) to you find neutral.
Check the linkage from gearstick to gearbox
1,545 views
Usually answered in minutes!
×