Just bought S 320 cdi , drives very well, but when starting engin cold , it only moves on R or D when I rev up to 2000 rpm , then drives normally , but if Istop the car , pull off again it goes very softly on 800 or 900 rpm . So the problem is the first start only. Is that normal or there is something wrong..advice me guys , Thak you
SOURCE: Will not go into reverse/05 chev avalanche
chances are you have a transmission problem. If its just reving it means the transmission isn't catching. I would take it to a transmission specialist right away and be sure to call the seller. I would ask for your money back or have the seller pay for the repair cost, which may be a lot. Advice for the future: Always test drive the vehicle so you don't get ripped off.
SOURCE: vault on automatic gear box on toyota estima enima
Normal reason for this because car is low on automatic transmisson fluid
SOURCE: s class stuck in park
Hi there,
Try this. Start engine, pump brake pedal four times, depress brake pedal and try selector again.
SOURCE: hyundai excel 1996 automatic will engage reverse
It appears you have a Forward Clutch FAILURE. Replace the trans after you get it diagnosed and verified by a professional technician. By the way, do you have a Check Engine light? If so, what is the diagnostic code? The dealership can scan the system and find any codes which may have been stored in the TCM (Transmission Control Module). If there were any 'Incorrect Gear Ratio" codes, it's most probably the trans itself.
SOURCE: car does not drive forward but works in reverse
Sad to say but your automatic transmission has bit the dust.
209 views
Usually answered in minutes!
×