SOURCE: harmonic balancers
hi , you can take a look at our products section , or in the realated links , and i hope you could find it , and thank you for using fixya
SOURCE: Harmonic balancer on a grand am
you have to remove the center bolt of harmony its depend what engine you have most likely you need a little puller if the belt loose check the belt tensionner to see if its not broken pierre
SOURCE: How To Remove the harmonic balancer on a 2001 ram
Here is a link to a 2001 Dodge Ram Factory Service Manual with diagrams and step by step procedures.
SOURCE: no treads on harmonic balancer
the pulley on the crankshaft should have grooves in it for the belt, otherwise the belt will not turn. is the pulley broken off, get back to me. there are NO technical servise bulletins on this item,if you need more help get back to me, Thanks Ray
SOURCE: im tring to find instructions on how to install a
If you have a manual, likely you are looking in the wrong place...that would be listed as part of any timing chain removal, front seal removal etc.
Balancer is removed by taking off any pulleys attached to it, removing the center bolt, then using a harmonic balancer puller (specific tool).
To put it back on, just put the new one on the crank snout, put back in the center bolt and washer and tighten it up. (anything that is in your way and preventing you from getting in there needs to be removed as well)
564 views
Usually answered in minutes!
×