Grinding noise and now ABS light stays on. 2007

SOURCE: 2002 Chevy venture indicator trouble

Try disconnecting your battery for about 30 sec to reset the ABS computer. You probly have a trouble code stored in the ABS computer and the lights are letting you know there was a problem. If the light stays on after you reset computer then you will have to pull code to troubleshoot problem.

Joe. ASE Master Tech

SOURCE: My Chevrolet silverado ss abs light came on?

Take the wheel off and check the brake pads, they are probably worn down, and the metal backing on the disc brake pad is rubbing against the rotor.If that is the case, the rotor will need to be replaced, or turned down if it isn't too bad.

SOURCE: ABS Brake lights stay on all the time

U need someone with an OBDII ABS computer too reset the light. Usually a dealer shop will do it fairly cheap...

SOURCE: abs light on, traction light off and grinding

could be a warn front hub bearing. this is real common . new hub should come with the abs
wheel speed sensor. jack up car and safely
support , rotate tires and listen for noise ,
also attempt to wigggle/ move wheels and
see if any play

SOURCE: replace lights in steering wheel control 2007

1-Pull the whole control out with a flat screwdriver 2-Twist out the bad light 3- replce with a new micro bulb
You can buy them here http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Finstrument.html