Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jul 28, 2013

Steering wheel controls not working

The back button on my hynduai elentra 2011 is jammed and now none of the other buttons on the left side are working

5 Related Answers

asdlfk

  • 1 Answer
  • Posted on Dec 03, 2008

SOURCE: steering wheel controls

Replace the clock spring, or check all the cabling and plugs first. If you are inexperienced take it to an auto electrician, otherwise do it yourself but disconnect the negative battery terminal for 2 minutes prior to opening the steering wheel to check the plugs, as not doing so could cause the airbag to go off. In addition you can also take out the airbag fuse. Check radio control plugs and close it up again and reconnect everything in reverse order. If that doesn't fix it, then have the clock spring replaced professionally, its too much mucking around if you don't know what you're doing.

Ad

Anonymous

  • 3533 Answers
  • Posted on Jan 18, 2009

SOURCE: 2006 ford taurus cruise control not working

I would get the owners manual out and find out where the fuse is for the cruise control cause there is a pickup switch for the cruise under the hood by the throttle body when it is engaged you don't have to have your foot on the pedal

Anonymous

  • 2 Answers
  • Posted on Jan 22, 2009

SOURCE: 2002 Honda Accord EX V6 cruise control failure

http://www.handa-accessories.com/accord/accswc.jpg

So after you push the button and then press the set button in the steering wheel it does not get into cruise control ? It sounds like a minor electrical problem. If you have warranty still I think the dealership should fix it for free.

Sorry i have not been able to help you.

Anonymous

  • 61 Answers
  • Posted on Jan 29, 2009

SOURCE: chevy steering wheel controls

You first have to disarm and remove the air bag (unscrews with bolts from behind the steering wheel) and then you will see the screws for the switches. Only the silverado awitches will work.

bluedevil42

Kevin Jordan

  • 34 Answers
  • Posted on Aug 23, 2009

SOURCE: steering wheel controls

change out the clock spring. i had this happen to me google the lincoln ls clock spring installation and then go to the dealership and purchase the part. it will run you about $138.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My left side controls aren't working on my 2001 Chevy Silverado

Could be as simple as the switches in the steering wheel or more complicated as a ground in the clock spring connections.
0helpful
1answer

Steering controls on 18 Honda Civic do not work. I cant turn the volume up or answer calls from steering controls.

get a meter and start checking the harness with the connectors from radio to steering controls
0helpful
1answer

MY LOW BEAM LIGHTS, BREAK LIGHTS AND RADIO SOUND CONTROL ON STEERING WHEEL, ALL STOPPED WOKING

Steering wheel radio controls and horn not working - Jeep Wrangler ...

www.wranglerforum.com/.../steering-wheel-radio-controls-and-horn-not...

Sep 22, 2014 - 12 posts - ‎6 authors
... 2Dr sport and my step/reset buttons, radio control and horn all stopped working. ... Also the lights behind the step/reset and cruise control went out, but the ... Soundslike a bad clock spring ribbon cable in the steering wheel. steering wheel buttons not working
30 posts
Jun 14, 2012
Steering wheel audio controls
30 posts
Mar 5, 2011
More results from www.wranglerforum.com
1helpful
1answer

How to fix + and mute buttons on steering wheel

you can buy the switch from the dealer and they change very easy
0helpful
1answer

How do I rest the Service indicator for a 2005 CLK Cabriolet? None of the suggestions listed below worked for me.

First make sure all of the doors, hood, trunk, etc are closed.
Turn the key to position 1
Press system select button(lower left buttons on the steering wheel) that looks like sheets of paper until you see mileage reading or temperature displayed.

Press the brightness button on the lower left instrument cluster 3 times. You should hear a signal and see voltage on the display.

Turn the key to position 2

Press the lower scroll forward/back button(steering left arrows)). You should see "service indicator" on the screen

Press the Brightness button again once. You should see oil type on the screen.

Select the oil grade you used by pressing the + & - buttons on the upper right on the steering wheel.

Press the scroll forward/backward button to confirm. Confirm oil reset, press R(brightness button on lower left on cluster) for 3 seconds should appear on the display.

Service confirmed should appear on the display.

Press the upper forward/backward button & "service indicator" appears on the display.

Press the upper system select button(lower left steering wheel button on left) The display should go back to basic mileage or temperature.

If all else fails. I believe the shortcut I took as a tech was, turn the key to the first position, scroll until you see the temperature or mileage displayed. Turn the key off, push in the brightness button and HOLD it while turning the key to the 2nd position. You should see something like do you want to reset service? press R(brightness) button for 3 seconds and it should reset.

Good luck. The newer cars are worse.
0helpful
1answer

My 2011 Dodge Journey shows "Back" with an arrow pointing to the left in the middle control panel. What does this mean?

The center panel allows you to access tons of information. The icon your describing means that if you push the "back" button on your steering wheel, you will go to the main menu. All the menus are controlled by the arrow buttons on the wheel.
0helpful
1answer

Cruise control come on by itself

Please use correct English.

Ahem: The cruise control light comes on by itself without me touching the button on the left side of the steering wheel, please help I am in great jeopardy if my cruise control does not work correctly.

Better? I think so. (Bonus! It also rhymed at the end)

Get a tune up, spark plugs are probably bad, and you might need them to check your computer or un-jam the button if, in fact, you aren't just hitting it on accident.

Hope it helps.
0helpful
1answer

Stereo controls have stopped working on Mazda6

I have the exact same problem. Occurred after car was jump started. Havent been able to find any solutions. Did you solve this problem?
1helpful
1answer

Why cruise control won't work on 2003 ford explorer

If you hit "On", cruise control is on. It's just not set to the speed.

To properly set the cruise control, do the following procedure:

  1. Select the "On" button on the left side of the steering wheel
  2. On the right side of the steering wheel, there is a "+" along with "Set", press that button after you have accelerated to the speed you desire to maintain.
  3. Use the "+ and -" to speed up or slow down your vehicle.
  4. To temporarly disable the cruise control, simply press the brake pedal.
  5. To resume the previously desired speed, press the top button "Resume"
Not finding what you are looking for?

297 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...