2004 Ford Explorer Logo

Related Topics:

Cynthia Guess Posted on Mar 31, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

The plastic bracket around my passenger visor has broken,

The cheap plastic ring around the metal bracket which the sun visor is attached has cracked and now the visor is limp and basically useless. I live in florida and would like to fix it. I am on a low budget and need some advice and guidance please.

  • Cynthia Guess Jan 24, 2010

    I tried the junk yards. Was told my vehicle is too new, and popular to be found in most junkyards. That was my first avenue for a solution and replacement. Thanks though.

  • EZClip Brackets Oct 03, 2013

    Ezclipbrackets.com sells a metal bracket called The Silver Bullet 3 that works like the original mount on 2002 - 2005 Explorers. If you have a different model send us pictures and information on it. We're currently starting a test group for 2006 - 2010 Explorers.

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 124 Answers
  • Posted on Mar 31, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Mar 10, 2009
Answers
124
Questions
0
Helped
53655
Points
372

Try looking for one in a junkyard

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

HOW TO FIX A DROOPY DRIVER-SIDE SUN-VISOR IN A 2007 KIA SPORTAGE LX?

sun visor pivot point has broken plastic around post to hold visor up . the whole visor will need replaced to correct issue
0helpful
1answer

How do i replace the sunroof track on my 2001 jeep grand cherroke limited? the bracket that the air deflector attaches to is broken.

You have to remove the headliner. Remove all the door column bezels and rear bezels, both sides. Remove the sun visors. Remove any dome lights and look for screws. Most headliners have plastic buttons and Velcro that hold them in place. Start in one place and work your way around to release the headliner. Being extremely careful. Because if you pull down to hard, you will crack the headliner, leaving a nice crease. Once the headliner is out, You can get to the sun roof regulator and motor.
0helpful
2answers
0helpful
1answer

My sun visor on driver's side is broken. What caused this to happen, and can I fix it myself?

Bad design cheap plastic is the cause. I fixed mine by making a plate bracket in my garage out of 1/4 aluminum cut and shaped to size using a template. Drilled 5/16" hole in middle for visor stem to fit into. Cut off very end of visor stem then tapped stem tubing hole ID 8x1.25 m for bolt and washer to secure to the plate I made. Works great! Took about 2 hours total.
1helpful
2answers

My sun visor on the driver's side just cracked and

I fabricated my own brackets for my 2004 Ford Explorer to mount (or should I say re-mount) my sun visors after they both crumbled and fell on us. I cut some thin metal (tin I think) and put 5 layers together to form the bracket. If there is any interest, I'll upload some pictures and instructions over the week-end to show how to install it. I'm thinking about offering to make these for $12+ shipping for one bracket or $20+shipping for a pair.
23helpful
1answer

Sun visor replacement

You unscrew the two bolts and gently take the visor off the mount. There will be a wire attached that has a plastic male/female connection that can be pulled apart. Do this gently. The wire is the power connection for the vanity light located within the visor.
7helpful
2answers

Broken sun visor

On the plastic cover take a small screw driver and pry one of the open ends, in other words if you look at the cover carefully it is shaped like a U, pry on the top right side of the U to un-snap then rotate or twist the cover to remove.Then you can get to the screws that hold it into place/
2helpful
1answer

Broken sun visor

The sunvisor is attached to the roof with 3 screws on the outboard end of the visor (towards the door). Once you removed these 3 phillips head screws and pull the attaching bracket down, there may be an electrical connector you will need to unplug. This is not a difficult job.


Hope this is helpful!


Nissan Scope Technician- 10+ years experience in Nissan dealership.
Not finding what you are looking for?

995 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...