Bought a police car 2006 crown vic, horn was removed, how do ireplace it?
I believe once you have mounted the horn and connected the wire you will find that the horn wire was cut at (by) the steering coloum that the siren override was hooked to,you will have reconnect this,I hope this helps you
When they removed their wig wag and siren from my car, they cut the c.r. ap out of the wires. What a mess! Took a piece of wire (with both ends stripped) to test with... stripped a small area on each wire, and touched the test wire to the bare spot and the battery, until the horn sounded... that is the wire we used. Then, using a push button bought at Auto Zone ran a doubled wire inside the cab, cut it and placed one end on each side of the button... under the hood, one end of the new wire connects to the one that made the horn sound, and the other end of the new wire connects to the battery. Use electrical tape to cover every wire that was shaved and not used. NOT PRETTY... but we have a horn.
Bolt it back on and plug it in
864 views
Usually answered in minutes!
You need to plug it in first before you can install it. I think it will make the job alot easier. LoL
how to disconnect and alarm on a 98 Crown Vic
how to remove a alarm system on a 98 Crown Vic
×