2003 Hyundai Santa Fe Logo
Posted on Mar 30, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Front wheel alignment

I have a 03 Hyundai Santa Fe 2.7L V6 that needs adjustment on front wheels alignment.

  • malem Mar 31, 2009

    The inner sides of both front tires are worn out more than the outer sides.

  • Anonymous May 11, 2010

    unless you have the equipment/tools wheel alignment is not a DIY job you can undertake best advice is visit local tyre depot and have it checked as to what problem is regarding the necessity for wheels to have realignment??

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 566 Answers
  • Posted on Mar 31, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Oct 11, 2008
Answers
566
Questions
0
Helped
322204
Points
1817

Thanks for your reply/update the reason for front tyres wearing as you describe would suggest the steering tracking is wrong and for some reason ?the tyre wear on inner isindication the track is toeing out too much ? this fault could be ? simple adjustment req'd however dependand on make of tyres has to be considered when tracking as to whether they toe in or out or straight ahead ? also front wheel drive ? there could be other factors b4 tracking is adjusted such as steering joints wear ? or damage ? also suspension ? as i mentioned best to visit a good tyre depot and let them investigate while you wait and give you a reportas to fault normally free in uk if it is simply tracking req's re adjust then they can do it and charge for the adjusting not expensive and they may also recommend switching wheels from rear to front providing tread are good ? hope this helps best wishes

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2010 Hyundai Santa Fe Limited V6 why the key remote want lock the left front driver door?

You may need to replace the power lock actuator motors inside the door . Alternatively, you can try disassembling the paneling on the left side under the steering wheel and removing two black relays on the side closest to the steering wheel. Then remove the relay covers and clean the contacts with a 1/8 fine strip of 600 wet/dry sandpaper.
SOLVED: 2010 Hyundai Santa Fe 3.5l. Why the key remote - Fixya
2010 Hyundai Santa Fe: driver's door lock locks only - Fixya
0helpful
1answer

Cam sensor location 3.5 l V6 2005 Hyundai Santa Fe

The camshaft position sensor on the 2005 Hyundai Santa Fe 3.5L V6 is located on the side of the engine block, just below the ignition coil packs. It is held in place with a single 10mm bolt. To replace it, you must remove the bolt and then unplug the wiring harness. Once the old sensor is removed, replace it with a new one and plug the wiring harness back in. Finally, reinstall the 10mm bolt and tighten it securely.
0helpful
1answer

Hit wall with left front tire; now DBC is glowing red and ESC is glowing yellow. Can I drive Santa Fe? Or should I have it checked immediately

have it checke3d immediately as you have damaged the steering and the wheel alignment is out . If front wheel drive you may have bent a drive shaft.
0helpful
1answer

Wheel alignment santa fe 2001

did u do the alignment yourself or sameone did it for u, if so take the car to kwikfit for wheel alignment so that they can put it in the machine for a proper alignment.
1helpful
1answer

2001 hyundai santa fe starts with one crank but won't go into drive or reverse, only goes into park and neutural what could be the problem? i have a 2001 hyundai santa fe 2.7 l v6 all wheel drive

You do have drive and reverse,if you have park and neutral.It just the transmission cant transfer that power a new or rebuilt is the solution
0helpful
1answer

The Hyundai Santa Fe is 4X2 or 4X4????? Please.

Hello! the 2002 Santa Fe has optional All Wheel Drive (AWD)...Which is permanent (can not be turned off)...If the option is not on your vehicle then it is Front Wheel Drive (FWD) only...The VIN # will tell you if the option is on your vehicle...

Guru...Saailer

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

3helpful
2answers

2004 Hyundai Santa Fe 3.5L V6 What all do I have to take off to replace a Crankshaft Position (CKP) sensor

Removal & Installation
  1. Disconnect the negative battery cable.
  2. Disconnect the connector from the sensor.
  3. Remove the retaining bolts.
  4. Remove the sensor from its mounting.
To install:
  1. Installation is the reverse of the removal procedure.
  2. Clearance between the sensor and the sensor wheel should be 0.020–0.059 inch.
Crankshaft Position Sensor The crankshaft position sensor is located at the front of the engine near the timing belt.

30c0fde.jpg
5helpful
2answers

2003 Hyundai Santa Fe ABS light is on along with TCS light

you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle
0helpful
1answer
0helpful
1answer

Hyundai santa fe 03 running problems

If your Santa Fe has a V6 engine 2.7L , it sounds like you have an ignition break down happening. You will need to renew all the ignition wires and check the two coils also for arcing .
Not finding what you are looking for?

807 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...