Vw fault codes 01284 01314 13265 can you explain please

you can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, co mplete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete

https://www.youtube.com/watch?v=O0Uwq1M64Ao https://www.obd-codes.com/p0087 these links should explain and assist with problem

code p 0711 refers to unexpected ,mechanical gear disengagement====causes --operator error---transmission mechanical fault
make sure that it is not operator error before removing the box or ,
best take it in to an accredited professional transmission service center that has experience on VW transmissions to have it properly diagnosed

a VW ?
transmission fault code

http://forums.ross-tech.com/showthread.php?4784-01192-Torque-Converter-Loc-up-Clutch-Error-SOLVED!

First off, let's simply define the OBD-II Trouble Codes:
Yes, 18032/P1624/005668 are the three codes that indicate "MIL Request Signal Active."
So, what does THAT mean (in plain English)??? This means that Fault Codes are stored in the TCM. SO WHAT'S THE SOLUTION?
MyAirbags has a reset solution for 04-07 VW Jetta 1.8L/2.0L https://www.myairbags.com/product/vw-jetta-2004-2007-1-8l2-0l-ecu-ecm-pcm-repair/ as well as the VW Jetta 02-06 2.5L/2.8L
https://www.myairbags.com/product/vw-jetta-2002-2006-2-5l2-8l-ecu-ecm-pcm-repair/
You need to have the TCM reset to its original status. https://www.myairbags.com/how-it-works/ecu-ecm-pcm-tcm-unit-repair https://www.myairbags.com/engine-control-unit-repairs-ecu-faqs

P3130 is EGR System Regulation Limit Exceeded..Here is a link to a thread in a VW forum that discusses this issue, and can explain it.

http://forums.tdiclub.com/showthread.php?t=200815

hi i have a passat 1999 1.8 petrol and i hav this fault 17925 and the car wont start i used the vag-com software....please help dont know wot to do

1. VW VAG type 5 digit fault code 19497 = EOBD type P3041 fault code:
Fault location = CAN data bus, instrumentation - implausible Engine Coolant Temperature (ECT) signal
Probable cause = Wiring, matching resistor in Engine Control Module (ECM)

2. VW VAG type 5 digit fault code 18032 = EOBD type P1624 fault code:
Fault location = Malfunction Indicator Lamp (MIL) - request signal active
Probable cause = Trouble code(s) stored in other system(s)

3. VW VAG type 5 digit fault code 01039:
Fault location = Coolant Temperature Sensor (G2)
Probable cause = Open or Short to Plus, Short to Ground - Intermittent

4. VW VAG type 5 digit fault code 01304:
Fault location = Radio
Probable cause = No Communication

5. EOBD type P0761 fault code:
Fault location = Shift Solenoid C
Probable cause = Performance or Stuck OFF