Question about 2002 Jaguar X-Type

1 Answer

Remove rear door panel on x type jaguar

I need top remove the right rear door panel on my 2002 Jaguar x-type, I found a screw on the bottom, and one under a cap in the center, but I find nothing more that allows me to remove the panel, please advise.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace door lock cylinder drivers side 2002 x-type jaguar.


From inside the door trim. They are $340 new!

Door Trim / Card Removal, Jaguar S-Type R STR - YouTube

? 2:27
https://www.youtube.com/watch?v=PIl_Fsy7BUk
Apr 9, 2015 - Uploaded by Jag TV
This video shows you how to remove your interior door trim / card from a Jaguar S-Type R STR. ... I DONT ...

Drivers Door Handle Help - Jaguar Forums - Jaguar Enthusiasts Forum

https://www.jaguarforums.com > ... > Jaguar Models ( Modern ) > X-Type ( X400 )Jan 23, 2011 - X-Type ( X400 ) - Drivers Door Handle Help - Hi all, im having issues with my drivers door, the quick link posted by JimC64 helped, but the real issue. ... I have a 2002 2.5 sport if that helps. Thanks in ... Disconnect the front door exterior handle connecting rod and the door lock cylinder connecting rod. 4. S-Type 'HOW TO' Guides - Jaguar Forums
23 Sep 2017
How do I remove / replace door lock? X-Type Rear Door?
30 Apr 2011
Drivers door, outside handle removal - Jaguar Forums
27 May 2010
More results from www.jaguarforums.com



replace door lock cylinder drivers side 2002 type jaguar Google Search

Mar 12, 2018 | Cars & Trucks

1 Answer

The rear window automatic open and close system has stopped working on my jaguar stype,reg t55 jms


On both rear windows, or just one? If its just one then probably the regulator mechanism in the door has broken (there are some rather fragile plastic parts that can snap with age). The mechanism is easily replaced by removing the door trim (take out two screws found under the rubber mat in the door handle well, and pry off the whole door panel with a wide blade screwdriver or cats paw (start at top edge nearest to rear - 4-6 snap fittings should pop off reasonably easily). Unscrew old mechainsm and replace the whole thing.. Parts usually available on Ebay for $50 to $100, make sure you get the correct orientation, front and rear, and left and right, are all different parts - Lincon LS parts also fit perfectly).

If both windows not working and stopped at the same time... sounds electrical.. start checking fuses?

Jun 29, 2011 | 2000 Jaguar S-Type

1 Answer

How do you remove door mirror on x type jaguar


open up the door and remove the black plastic trim piece that runs on the inside of the door. IT runs from the triangle piece where the mirror is up and over the window. From there, you will see a single nut. This holds the mirror in place. Undo and the mirror is now free. If I remember right, you can access the plug for the mirror at this point too. If not, you will need to remove the door panel (2 screws on the bottom, 1 screw inside the pocket near where your elbow would be if you were sitting in the car). From there, pull straight out towards you on the edges and the door panel comes off.

Jun 26, 2011 | 2004 Jaguar X-Type

1 Answer

How to install a 2002 Jaguar X-Type cabin air filter


Its located at the front center of the engine (it have Jaguar logo), you need to remove 3 screws of the large panel and the oil cap, remove this large panel and then remove other 6 screws of the air filter box.

Sep 02, 2010 | 2002 Jaguar X-Type

2 Answers

How to remove rear door interior door panel


You should obtain a tool made specifically for removing door panels. They are attached by "snap" connectors, and by pulling on the door panel itself will invariably ruin it. Get the tool from a parts place and carefully peer into the slot between the door metal and the door panel. Use the tool slowly with resolution. You should really acquire a manual that guides you for your particular Jag.
Remember, to take the panel completely off, you need to remove the door handle. Look for a plug that has a screw under it. You'll need to pop the door window/lock control panel too, to access screws under there. This can be tricky, so be careful.

Nov 24, 2009 | 2002 Jaguar X-Type

1 Answer

How do i remove the drivers side door panel on a jag s type


This is the same front or rear door. 1. remove rubber insert at the bottom of the arm rest/door handle 2. remove the 2. philip head screws. 3. run hand along bottom edge of door panel to ensure no other securing screws. 4. starting at the top rear edge of the door panel side a large flat screw drive/door panel tool(what ever you have) 5. lift sharply and you will here poping noises fromt the push clips lifting out of the socket. 6. as you work down the rear edge of the door panel you will see the trim around the interior door handle lift away. remove it. 7. the interior door handle will remain on the door. 8. remove the rest of the door panel.

Oct 10, 2009 | 2000 Jaguar S-Type

1 Answer

Jaguar x type 4 door. how to remove inteior rear panel to replace speaker


There are 2 or 3 screws under the panel and other one behind the handle (not the one to open the door, the one you grab to close the door) this one is covered by a round plastic tap, remove it first with a small sharp pointed tool, then very carefully try to pull out the entire panel, be very careful not to broke the clips, you also need to "unplug" the wire that opens and close the locks.

Sep 22, 2009 | 2002 Jaguar X-Type

4 Answers

Driver window on 2000 s type jaguar off track


You will have to remove the screws to door panel, remove window and lock controls. Then gently pry the plastic studs out of the door and lift the panel up and off. You will now have access to track and window

Sep 10, 2009 | 2000 Jaguar S-Type

1 Answer

S Type JAguar Rear Door


First remove all of the screws, some will be hidden under plastic caps, then take a door panel tool (about $5.00 at a parts store) and work it around the panel popping out the plastic keepers. Be carefull and try not to damage the panel where the keepers attach, you can buy new keepers at any auto part store and even Lowe's and Home Depot carry them.

Jul 18, 2009 | 2000 Jaguar S-Type

1 Answer

Need to replace the driver's door interior door opening assembly


Hi there.

The procedure is roughly the same for all mk3 x types.
You need to remove all the screws on the armrest and on the ashtray, then undo all the plastic clips using screwdrivers on the panel.

You find detailed instructions on links below, I quote:

" remove two screws at the bottom of the armrest.
pull out ash tray.
remove screw in the middle of the ash tray holder.
pull up on armrest, it should pop up, then pull it out
start at bottom right of door and start popping out the plastic clips (all the way around the door)
(remove speaker wires)
push up door panel - done"



WikiAnswers - How do you remove a rear door panel in a Jaguar XJ6


Also from manual:

Disconnect vehicle battery ground lead.
Remove the door trim pad veneer panel.
Remove the upper trim pad.
Remove the door armrest.
From inside the door pocket, release the puddle lamp (1 Fig.1) securing quarter turn fastener.
Undo and remove fixing (3 Fig.1), (front door only)
Carefully release lower trim pad fir tree fasteners.
To avoid damage and distortion of the door metal, lift the lower trim pad complete with clip and clip retainer.
Carefully pull the trim pad away from the door panel.
Disconnect the multi-plugs (1 Fig.2) and remove the lamp.
Carefully displace the trim pad (2 Fig.1) from the door retaining clips.
Disconnect the multi-plugs (2 Fig.2) and (3 Fig.2).
Remove the door pocket.
Displace and remove the retaining clips and remove the trim..
Refit in the reverse order of the removal procedure. Check the trim pad retainers for damage before refitting.

Before refitting the lower trim pad, remove the clip retainer from the pad and and reposition retainer to the door.

ndo door handle escutcheon screw and remove escutcheon
Remove the door trim pad veneer panel.
Undo and remove the upper trim pad securing screws.
Remove the chrome strip.
Undo and remove the top channel securing nuts.
Displace and remove the top channel assembly.
Place the trim pad aside (Fig. 1).
Refit in the reverse order of the removal procedure.

bbad647.gif

36a4a47.gif

cc1f9fe.gif

Thanks Jaguar XJ6 Interior Lights

I will be grateful if you can rate the solution given.

Many thanks.

G.

Feb 25, 2009 | 1995 Jaguar XJ6

Not finding what you are looking for?
2002 Jaguar X-Type Logo

1,405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85219 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...