2002 Chrysler Sebring Oil pressure light

Have you checked the oil level in the engine? Without suffient oil, the oil pressure will drop.

You need an OBD2 reader to pick up your fault codes.

sounds like low oil pressure not good

If you need further help, I’m available over the phone at https://www.6ya.com/expert/mike_9693b5ad75773352

Sounds like bad oil pressure switch. Is the engine making any loud noise(s)? I'd replace oil pressure switch and/or check connection at oil pressure switch.

1) Check your car to see if it has oil and oil is at the recommended level. 2) Check if there is any leakage from the oil pan, or sign of oil be consumed 3) If everything looks good, you may need to replace your oil pump.

May be wanting an oil change, or could mean low oil pressure or low on oil (need oil added).

Recommendation... Do Not purchase an 02 chrysler sebring! While it is a cute car and looks nice, they have consistently been rated as one of the worst vehicles based on expense of shop repairs, and also rated one of the worst vehicles for amount of time spent in shops. The oil light flashing is a sign that the car should not be driven due to not enough oil in the vehicle, any owner who overlooks that light, especially when trying to sell it, has obviously not taken very good care of it, therefor another reason.. NOT to by a chrysler sebring.

2.7 ? This motor has oil problems if not changed every 3000 miles. Put a chrysler filter on it and the correct weight of oil, never use a fram oil filter.

without confirming oil pressure,(not level)are within normal specs,I would replace the oil pressure switch,If you need the location let me know. DB