Cylinder head bolt torque specs for Mercedes C180 W203 series with a M271 engine
SOURCE: Mercedes Benz C180 Fault Message Brake Assist.Visit Workshop BAS
Hi there
BAS is the Brake Assist System and if there is a malfunction it would
only come into play in an Emergency stop while applying full pressure.
BAS applies full braking force because people tend to lighten up their
pressure on the pedal in these situations. I would suggest that the best thing to do is go to a Workshop or Service Center and have it checked out. Please remember to put a good rating on my profile.
Kind regards
Dustin Ellse
SOURCE: mercedes c class c180 2001
hi,rear sam control ,fuel gauge,tail light,depends what equipment install at the rear,ty
SOURCE: radio cassette password for mercedes car c180 1994
Hi, The best way to sort this is to take Log book/Title, proof of ownership and your identification to a Merc Dealership and they'll be only too glad to take some money off you for supplying the code.
Press the Blue Button please to appraise my FREE! Effort.
Thank You !
Paul 'W' U.K.
SOURCE: mercedes c180 fuel gauge giving mix reading
You can try to clean the ground behind the instrument cluster to see if that helps but most likely the sending unit has gone bad in the gas tank.
SOURCE: 94 mazda B3000 3.0L cylinder head torque specs
Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds
Use torque sequence below
11,710 views
Usually answered in minutes!
×