Heater/Cooling problems on my 2000 Acura RL. My heater stopped working. All lights come on as if it were blowing air but it doesnt blow hot or cold air. Any ideas?
Check the fuse for your blower motor if it is OK the Blower Motor may be bad or you may have a loose wire to or from the it have it checked if fuse is good
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Having to use the heater as a auxiliary cooling source simple tells use the cooling system needs a little help. 1. make sure the AC and Radiator coils are not plugged on the outside 2. let the car idle until normal operation temp is achieved, see if the cooling fan comes on a. if not the fan is at fault b. the fan sending unit is at fault c. or dirty or broken wires
IT is a "Time for Service Code"
B2 Means its time for an oil change, Tire rotation, Cabin filter replacement and air filter replacements. Call your dealer or local Acura rep for an appointment.
Hope this helps.
If you can locate the temperature switch, looks like a large bolt head with 2 wires on it, bridge the wires on it, and this should make the fan work. If the fan works then this switch is faulty. If the fan doesn't then it could be the fuse, or a broken wire. The fan switch is either on the radiator or on the thermostat housing. If you can get to it easy, short across with a screwdriver.
The SRS computer needs to be reset, if you dont have a repair manual i would first suggest finding one for each car. The basic principal is that you jumper the diagnostic plug (under the glove box in the RL). The next step I believe is that you must depress the TCS button, then while holding it down you turn the key to on, continue to hold the TCS button for 15 sec and then let off. The check engine light should then blink really quick a few times and that means its reset. Im reciting this from memory so dont quote me on it. I have done it before for the RL but not the integra, id really suggest finding a repair manual though.
I have the SAME problem. Did you find the problem?
Dashboard lights cut off acura rl
how to repair front headlights
×