Peugeot 406 over revving

SOURCE: when do you change a timing belt on a peugeot 406

I would change it at 80 K along with the water pump

SOURCE: i'v got a peugeot 406 hdi, it revs up on its own

Most likely cause is the potentiometer that the throttle cable operates. Its either got water in it, or has become corroded or worn. You should be able to get on from scrap to try. DONT disconnect it with the engine running or ignition on - it will cause a fault and have to be reset to clear it.
(Its the sping loaded round device on the end of the throttle cable)

Marvin

• 85242 Answers
• Posted on Sep 14, 2009

SOURCE: how to bleed a hydraulic clutch on a peugeot 406

you need to buy a vacuum clutch bleeding tool make by a company called MITYVAC

SOURCE: peugeot 406 hdi electronic immobiliser warning

did you try the spare key? are you sure it is an immobilizer light? what does the warning light look like, can you describe it? replacing the battery in the key will not help as it is not needed for the recognition of the key(this is done by an induced current). 

SOURCE: Peugeot 406 heater fan not working what do i do to fix it

if u remove the under cover in the passenger foot well, just turn the fan blower on full and hit the first thing you see when u look under the pass foot well with the palm of your hand and the blower should start to work.