My brake lights quit working the high center one works.I replaced 1157 bulbs worked for awhile and quit again.
SOURCE: 2000 jeep wrangler brake lights don't work
hello sounds like a bad or loose wire on your brake switch up under your dash follow your brake pedal upward push down on your pedal now watch as you let it go slowley where it touches the skinny flat area of your petal touches a switch about 10 inches up from the bottom you should see a button sticking thru a bracket were your pedal touches check and jiggle wire if no lights change switch goodluck
SOURCE: Brake lights not working
There is a flaw in the wiring of this model to the rear brake lights. Take it to a trusted mechanic if they follow the wires they will see where the sodder/connection has been broken. Jeep no longer uses this type of wiring. My mechanic said he got lucky and found the break, but if it happened again, he would have to replace ALL the wiring most likely.
FYI - I had this same problem about a year ago.
SOURCE: divers brake light does not work with head lights on .
big problem with jeeps 98 and up should be a safety recall but is not; you need to replace the drivers side tail light assembly with a new one, from jeep or auto parts store if available. used auto parts recycler may have one but your taking a chance, used should be 40 to50
dollars new over 100
I’m happy to help further over the phone at https://www.6ya.com/expert/gregory_8e6ba270263743ac
SOURCE: 1996 Jeep Grand Cherokee Laredo - message center
This is a problem I have been
seeing more and more of lately. The brake light circuit goes through
the Lamp Outage Module (LOM). When the LOM senses a inoperative lamp,
the Vehicle Information Center (VIC) displays the data to the vehicle
operator.
Here is how to test the system (clic for zoom):
Check here for more details about the location of Lamp Outage Module (page 16).
Hope helps (remember rated this help) Good luck.
SOURCE: Brake lights not working,checked fuse and replaced
check brake light switch under dash follow brake pedal up to steering column there u will find ur brake switch check that proper mounted than test switch and replace if bad
215 views
Usually answered in minutes!
×