Question about 2001 Oldsmobile Aurora

1 Answer

How remove the rear inside door panel on a 2001 oldmobile aurora

Rear window slipped of track, need to remove door panel to attempt repair. How to remove and reinstall inner door panel.

Posted by on

  • 2 more comments 
  • Anonymous Mar 13, 2014

    Cannot get rear door panel off

  • Anonymous Mar 13, 2014

    how do I remove a rear door panel for a 1988 bmw 325i convertible

  • Anonymous Mar 13, 2014

    rear door panel toyota rav4 removal

  • Anonymous Mar 15, 2014

    remove rear door panel chrysler 300m

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 295 Answers

The inner door panel is held in by clips and screw.
Look at the door near the door handle there should be screws holding it in and along the outer edge of the door. Once loose, and the door handle removed or the arm rest removed. The door panel then prys out , because of the clips that hold it on. Then pops out by applying pressure to the panel upward to the top of the door. The clips always break because of the design and plastic.

Good luck

Posted on Mar 21, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair rear window that won't roll up or


You'll need to remove the door panel from the inside of the door. Go to an auto parts store and ask them for a trim removal tool and a pry tool to help remove the window crank handle - tell the clerk what you want to do. Use the trim tool to unhook the catches around the outside of the door panel. Remember to unscrew the arm rest before you try to pull the panel off the door. Once you have that off, you will likely find that that the glass has slipped off of the track that the bottom of the glass rides on. It helps to have someone help you hold the glass as you lift it up and reset it on the track. Make sure that it is seated squarely on the window track and that it rides up and down smoothly before you put all the parts back together.

Good luck!

May 14, 2013 | Cars & Trucks

2 Answers

Hi Mike i have a 2001 olds aurora with both rear doors and windows out of commission. Seems like neither is getting any power the windows don't go up or down and my keyless remote will not unlock or...


There is a control module in each door with connectors. I have already had one where the wiring in the connector was bad. This takes some troubleshooting, but sometimes moving things around while trying to run the windows will should you where the loose connection is.

Oct 18, 2011 | 2001 Oldsmobile Aurora

1 Answer

2001 oldsmobile aurora rear door driver side window glass falls down and does not work with the electric switch


If you can hear the motor running while pressing the window switch you may have a broken clip or something in the way causing the window to slip off track. If no sound comes while pressing the window button you may need a power window regulator motor "OR" the window button itself may need replacing. If the window was down when it stopped working and had to be manually rolled back up, this can cause the glass to randomly fall back inside the door. This is because the car thinks that the window is still down and will continue to fall until it tells the computer that the window was closed using the power window button. If the window falls at just the wrong angle you could end up having to replace the glass as well.

Mar 28, 2011 | 2001 Oldsmobile Aurora

1 Answer

Passenger side rear window is off track, will not stay up or operate. Need to know how to remove door panel without damage


Please see my tip at http://www.fixya.com/cars/r6065762-removing_door_panels . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Oct 10, 2010 | 2001 Oldsmobile Aurora

2 Answers

Rear window keeps dropping on a 2001 Olsmobile Aurora


The motor may be faulty or the track may have came off the motor gear. You will have to remove the screws and pry off the door panel to gain access to window, frame, and motor

Sep 09, 2009 | 2001 Oldsmobile Aurora

1 Answer

Right rear window is off the tracks. How do I remove the panel?


if the window is off track the regulator is probably bad. to remove the door panel should be a couple of screws by the inside pull handle and possibly one by the door handle itself also check the bottom of the door for any then just pull it off and lift up to clear latches and remove plastic film to get to inside of the door

Aug 30, 2009 | 2001 Oldsmobile Aurora

1 Answer

Passanger window wont roll all the way up and makes noise and slips from it's position.


Window is misaligned/off track. Temporary solution; With door open, have 2nd person operate window while you press on glass from both sides. Guide window to full up position. Complete repair requires removal of inner trim panel (see my solution for trim panel removal). With panel off operate window (2nd person if needed). Observe window tracking movement. Look for broken loose parts inside door. If needed, observe correct operation of functioning door. Usually (if no parts damaged) glass needs to be loosened when fully up. Then correctly aligned in track. Then re-tightened.

Jul 10, 2009 | 2000 Honda Accord

1 Answer

Fallen driver's side window


probably need a new window regulator. ebay. 93 to 98 should fit.

Section 01-05: Trim, Interior 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Trim Panel(s), Door Front
Removal
  1. Disconnect the battery ground cable (14301) if equipped with power locks or power windows.
  1. swv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use care when removing the front door inside handle escutcheon (22620). Failure to do so can result in damage to the component.
    Carefully pry off the front door inside handle escutcheon by inserting a standard 1/4 inch screwdriver between the top rear portion of the front door inside handle escutcheon and the front door trim panel (23942) .




  1. If equipped with manual windows, slip a clean shop rag between the window regulator handle (23342) and the front door trim panel .
  1. Pull the shop rag back and forth to release the window regulator handle clip.




  1. Remove the three cover caps and front door trim panel screws.
  1. Remove the one front door trim panel capped screws from the door pull handle.
  1. If equipped with power windows, remove the door pull handle. Disconnect the electrical connectors.
  1. Slide a flat-bladed tool behind each of the retainers and twist the tool to disengage the front door trim panel from the front door (20124) .
  1. Remove the front door trim panel.
Installation
To install, reverse the removal procedure.
---------------------------------------------------------
Window Regulator, Power Front Door
Removal
  1. Disconnect the battery ground cable (14301) .
  1. Remove the front door window glass (21410) . Refer to the front door window glass removal procedure in this section.
  1. Remove the two front door brace bolts and the front door brace.


    415712f.gif

  1. Disconnect the front window regulator electric drive electrical connector.
  1. Remove the four front door window glass regulator track bolts.

    67b6136.gif


  1. Remove the three front window regulator electric drive bolts.
  1. Remove the front door window glass regulator track and the front window regulator electric drive (23394) as an assembly through the opening in the front door (20124) .
Installation
  1. Install the front door window glass regulator track and the front window regulator electric drive as an assembly through the opening in the front door .
  1. Install the three front window regulator electric drive bolts. Tighten the front window regulator electric drive bolts securely.
  1. Install the four front door window glass regulator track bolts. Tighten the front door window glass regulator track bolts securely.

Apr 29, 2009 | 1998 Mercury Villager

1 Answer

2001 malibu rear driverside window off track


Just take a phillips screw driver, and a good sturdy putty knife, and your fingers, and just pry the plastic away from the metal of the door...

Open the door first, and where the inside door handle there should be 1 or 2 screws, and one near where the handle is to open the door from the inside. Take these out first before attempting to pry off the door panel. The panel is held onto the door by plastic snaps shaped like an enlongagted tooth.

Use COMMON SENSE AND BE GENTLE YET FIRM....

Don't be surprised if you have to get a whole new window motor assembly, alot of times they come as one assembly and seperate parts do not exist. Good Luck!!

Aug 23, 2008 | 2001 Chevrolet Malibu

1 Answer

Removing rear door panel


Remove the door window regulator handle and then remove clip using a piece of cloth (Manual type only)
Remove the rear door inside handle housing.
Remove the mounting screws (3EA) from the trim fasteners and the door trim panel to pry off. Disconnect the connector.
Insert a trim panel remover between the trim fasteners and the door trim panel to pry off. Disconnect the connector.
Remove the door pull handle mounting bracket and door inside handle.

May 29, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
2001 Oldsmobile Aurora Logo

2,322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...