A few months ago I noticed my wife's right brake light is out. So I get my toolbox and undo the 3 screws behind the cloth trunk panel and pull out the assembly. I remove the bulb, filament looks fine so I put it back ask her to sptep on brake and lo and behold it illuminates! I put the taillight assembly pack together and forget about it for a while. Same thing happened this week, I start taking things apart to replace the bulb again and then bulb starts working again so I put everything back. Now this morning the brake light is "out" again. Is it a bad switch? I didn't see anything wrong with any wires when I had it taken apart. What do I look for besides shorted wires?
Hi joe its going to be that socket that has poor contact. It will more than likley need a the socket but try this first. unhook the battery, just so you dont blow the fuse. then remove the bulb look in the socket theres going to be 2 copper looking metal contacts bend them up alittle. this will take away the poor contact if thay are not cracked.If they are cracked you will have to get a socket.
254 views
Usually answered in minutes!
×