http://www.jeep.com/en/owners/manuals/index.html?year=2006&nameplate=Grand%20Cherokee
That should allow you to download a copy of the owner's manual that will detail the reset procedure.
Basically, on Jeep products you
To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure:
1. Turn the ignition switch to the ON position (Do not
start the engine).
2. Fully depress the accelerator pedal slowly three
times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary repeat this procedure.
need scheduled maintenance for 2003 grand am
×