Hi I am sking for a friend, his car was jump started in return locked the stero, it is a used car, and he can't find the manual, and the only way to fix it is to take it to the dearler ship, and he has no extra money, is there anything else he can do thanks Kris
Press and hold presets 2 & 3 for about 10 seconds until the first 3 digits of the display code are displayed.
2. Write the numbers down.
3. Press the AM/FM button, write down the next 3 numbers.
4. Call 1-800-537-5140, when asked, enter 620529, press the # button and
enter the 6 digit code from the radio, you will get an unlock code,
write it down.
5. Go back to the car, press the HR button and set the first 2 numbers,
then press minute button and set the next two last numbers, press AM/FM
button, SEC should be displayed, turn on radio.
To remove customers code, repeat step 5. you should see --- on radio face, the code is now out of the radio.
SOURCE: My car key/remote lock and unlock stopped working.
happened to me once. the fuse for it was blown. $3 fuse replacement. check the fuse box & manual for this component. the fuse removal tool is located inside the engine fusebox area, and the fuse for the lock is inside the driver side box.
SOURCE: radio
GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
the
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
you
to press "2" for Pontiac, press 206010 and hit the # key. He'll ask
you
for the 6 digit code that you've written down. Enter that and press
the
* key. He will then give you a code, and the option to get additional
4
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
until
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
the
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
and
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
receive
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck, and yes, it
does work.
SOURCE: malibu 2004 radio unlock codes
The only way to unlock the radio is by using a scan tool. The scan tool sends the appropriate diagnostic message (relearn VIN) to reset the radio. Using a scan tool, select the radio VIN relearn procedure from the module replacement screen in Vehicle Control Systems......find some one with a Tech 2
SOURCE: 2005 chevy cavalier steroe is locked need code
The only way to unlock the radio is by using a scan tool. The scan tool sends the appropriate diagnostic message (relearn VIN) to reset the radio. Using a scan tool, select the radio VIN relearn procedure from the module replacement screen in Vehicle Control Systems
SOURCE: radio is locked on chevy cavalier
I replaced the radio on a similar car with an identical junk-yard radio/cd player. of course it was locked. I went to the dealership and they were nice enough to plug a hand-held computer under the dash and unlocked it for free. Took about 5 min. Hope this helps.
If it is a factory security system there is no unlock code.They either need to get a new battey or a jump, they can unlock the car with the key.
When they jump it if the horn starts to honk they can lock and unlock the drivers door with the key to turn the alarm off.
When they do get going the radio will be displaying code. If they do not have the code with them I may be able to help if Honda's site is up for codes today. Here is how they can get the serial number needed from the radio assuming it does not have navigation:
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
1,693 views
Usually answered in minutes!
×