Need diagrams or idents for wiring a 13 pin socket on my landrover to tow a caravan. I have purchased the socket, TEB7AS relay, 30a fuseholder etc from indespension but no diagram was supplied. I am aware that I need to run a 30a fused supply, via 3mm cable, directly from the car battery to the relay. The relay has 7 connections and im unsure where to connect to and from.
Pleeeaaase help.
Black socket, black 7 core wire
pin 1 yellow left indicator
pin 2 blue, rear fog light
pin 3 white earth
pin 4 green right indicator
pin 5 brown right side/tail light
pin 6 red brake lights
pin 7 black left side/tail light
Grey socket grey 7 core wiring
pin 1 yellow, reverse
pin 2 blue, supplementary feed (ignition)
pin 3 white, earth
pin 4 green live feed (battery +)
pin 5 brown not connected
pin 6 red supplementary feed (ignition)
Pin 7 black earth
On the discovery there is a purpose made plug behind the panel on the drivers side rear, behind the rear lamp
i think the relay you have bought is for lamp failure you just need a normal 4 pin 30 amp relay.
Good luck Davelee
2,137 views
Usually answered in minutes!
×