At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
i took my car today to the emissions test today and it failed. they provided me with the following 6 codes, but it mentions what 3 of the codes are, the other 3 codes i guess pertain to specific car codes. My car is a 2001 Hyndai xg300, 6L, front wheel drive. it has 158,000 miles. lately it has problems starting, specially in the winter time, and when i accelerate it stall for a little and then speeds up very slowly and the problem is getting worse. i would like to know what the following codes are:
p1191
p1193
p1607
thank you in advance for the help.
The car is 1992 dodge colt 200e. When you turn the key, it turn the as many time as the battery can last, but did not start the engine. I have change the distributor with no difference. Any idea?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First the fault codes, U110C is No Fuel Level Bus Message U0155 is No Cluster Bus Message. Unfortunatly you have to be able to communicate with the instrument cluster with your scanner to diagnoise and I do not think an aftermarket scanner can do this.
Why aren't they just using the OBD II port instead of the dynomometer? Which state are you in? In Washington, where I work as an emission test specialist, we don't even use the dyne (rollers) to do the test. The OBD II port doesn't require the car to be taken out of park.
If you have to resort to it, just pull the TCS fuse for the test. The TCS won't activate and you won't get any emissions error codes.
Be sure to check with the testing facility before you do this. They may not allow it if it may be considered a safety issue.
I wish you the best!
po442 is evap emission control system leak (small) 1 of the lines for emissions is leaking. po455 is-- emission control system leak (large). turn off light with code scanner after it is fixed.
P1191 ETS Limp Home Valve On
P1193 ETS Limp Home - Low Rpm P1607 Vacuum Sol. Valve Stuck On or Vacuum Solenoid. Valve Stuck On,
I believe you have aproblem in the electronic throttle control motor/actuator, all three code's are related.
×