We had the oil changed recently and had the light reset, it went away for about a week and now it's back on. We bought this car from my 82 yr old grandfather(who always takes excellent care of his cars) and he had a piece of black tape covering it. I'm guessing this was an ongoing problem, any info would be appreciated!
You need to plug an OBDII scanner into the vehicle's port for the scanner. It will give you the various codes, which you can look up online for your vehicle. Some auto parts stores, (Auto Zone) do this for free so you do not have to buy a $250.00 scanner.
SOURCE: Warning engine light
I could not find a code for the neutral switch . The neutral safety switch only works when you start the vehicle, so it will not start in gear. I would take the car to another shop for a second opinion.
SOURCE: stalls when car decelerats, then break light and all lights come
get the oxygen sensor checkde out and the maf sensor...sounds like a vacuum leak too...Stop driving it and get it looked at ..if you dont see any loose hose's that are small in dia.. .then check those 2 sensors i spoke of ....
SOURCE: how do I reset the
just looked in my alldata book and says from 2007 dealer diagnostic machine only .Which is in common with a lot of other manufacturers and after a while it shuts the engine off onto limp mode would you beleave and here thay charge about 80 euros to reset
SOURCE: I started my car two days back it turned on in a
Might have accidentally placed in valet mode. try this Alpine Remotes
SOURCE: I have a 2000 Subaru
Here is an idea. Check the connections between the battery and the car's ground and the starter. Then find the ground cable which connects the engine to the car and check the connections there as well. Often times odd ball electrical problems are caused by a faulty ground, especially when there is a starter issue. May help, costs nothing but a few moments of your time, and once in a dozen times it is the problem.
67 views
Usually answered in minutes!
×