1993 Chevrolet K1500 Logo

Related Topics:

Emile Lanctot Posted on Dec 12, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Trouble code 22

I have had the TPs changed twice in my truck will last about a wek or so and then will act up again off and on when this happens the rpm will increace and fluctuate up and down and truck will not shift properly very high rpm befoe will shift from first to 2nd and to third ...hard shift and high rpm when this happens

1 Answer

Douglas M Burch

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chevrolet Master 1,001 Answers
  • Posted on Dec 12, 2017
Douglas M Burch
Chevrolet Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 21, 2017
Answers
1001
Questions
0
Helped
222217
Points
6028

Get the help from service and repair manual and fix the problem by your own easily and you can get the manual from the given link easily http://toolsnyou.com/

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jul 29, 2008

SOURCE: 1986 corvette 700R4 transmission will

Are you sure the TV ( trans shift cable at the throttle valve) cable is correctly adjusted?? Without line pressure readings, I can only guess that the D3/Part throttle check ball is missing, if it is a trans problem
If the TV is correct, I am assuming that the TV cable is pulled tight at WOT.
Did you check the throttle (ACCEL) cable to be sure that the carb goes wide open when your accel pedal is on the floor?? This must be done with someone in the car and a second person looking at the carb. Without doing this, you do not know if you have WOT. Without WOT, the trans will not de-tent and shift down.

Ad
junkman1249

Ricardo Loranca

  • 552 Answers
  • Posted on Dec 05, 2008

SOURCE: Engine RPM too high when transmission shifts. Bangs into gear.

check your fluid level when the car is warmed up

Anonymous

  • 962 Answers
  • Posted on Feb 06, 2009

SOURCE: slight miss in engine, hard shift from 1st to 2nd long 2nd gear

Check both O2 sensor(s) and catalytic coverter.. P0420 means catalyst below threshold. Also check the sensor at the transmission and solenoid.

Molson02536

Harvey N Tawatao

  • 3854 Answers
  • Posted on Jun 23, 2009

SOURCE: 1994 silverado 4L60E transmission not wanting to shift corrrect

If you have not worked on a 4L50E transmission before, leave it to someone who is familiar with the the 4L60E. The solenoid is in the valve body and i know some who have put things back together and needed to take it apart again over something simple as a servo pin in revers. Best thing to do is get the truck scanned at Auto Zone free of charge or at a transmission shop with a tech 2 scanner for DTC codes. If there is a bad throttle body sensor or it's misaligned, it would affect your transmission's performance. The throttle body sensor send's signals to the ECM which calculates the amount of transmission fluid pressure though out the shift points, if that signal is bad then your shift points and firmness will be affected. There is also a cheap and great performance upgrade for around $50.00. You have a Transmission shop swap out the servo's for a Corvette servo's, it can be done in 30 min with out taking the transmission down or removing the transmission oil pan off.
Recap, have the transmission fluid and oil changed and have the throttle body sensor tested. It should show a smooth gradual increase in resistance with out any fluctuation. You truck is 15 years old and it may have a dead spot on the sensor now and it may need to be replaced. Good luck and keep me posted, Be glad to help and you can also have the transmission shop do a transmission pressure line test.

Anonymous

  • 151 Answers
  • Posted on Apr 13, 2010

SOURCE: 1995 Chevy 1500 Z71...transmission only shifts

It sounds like a vacumm modulator issue.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 1995 dodge intrepid 3.3.i changed the tps and now, when I unplug it,the motor idle correctly but when I plug it back up and give it gas ,it kind of hesitates/kills I`ve changed the tps twice

It may be that no signal is better than a faulty signal? With no signal the computer may use a default value? Any applicable trouble codes?
If the sensor has three wire connector, did you check ref voltage--ground--signal?
0helpful
1answer

Continuos high idle

This happened to me, it was the sensor. From the sound of your problem, it sounds like the air flow sensor (relatively cheap fix)
0helpful
1answer

What does trouble code 22 mean on a 1993 chevy c1500 5.7

You have a bad TPS switch on the throttle boy carburetor, it records to the PCM where your throttle is to calculate fuel delivery, its cheap and easy to change, a 3 wire TPS sensor, good luck
4_24_2012_9_25_20_pm.jpeg
3helpful
1answer

Code 22 on 95 gmc sierra what does that mean also t will start up but wants to die we replaced idle air control valve and also the throttle position sensor did not fix it i check vaccum lines all good it...

Trouble Code 22 indicates that the Throttle Position Sensor (TPS) is reading abnormally low. TPS volts should be close to 0.42 V at closed throttle and rise smoothly in about 0.02 volt increments to a maximum reading of about 4.85 volts at WOT.
Typical causes for this code include:

1) Maladjusted TPS
2) Defective TPS
3) No +5 volt reference to TPS
4) TPS-return to ECM is shorted to ground or to sensor ground
5) Defective ECM

Good luck, i hope this helps.

0helpful
2answers
1helpful
1answer

Trouble codes MEANINGS

Code 22 OPEN TPS SENSOR CIRCUIT , E 70 INTERMITTANT TPS SIGNAL, E98 DRIVER CAUSED PARK / N TO DRIVE motion by the driver, attempting a shift position, not agreeable with computer. Go figure ! Hope this helps
1helpful
1answer

Trouble codes for 1993 Dodge Daytona with 3.0 liter

CODE 12
Trouble Code 12 is a special case code that is not logged into the ECM's Non-Volatile Memory (NVM) when detected. When the ignition is "ON" and the ECM detects no ignition reference pulses coming from the ignition module, it illuminates the Service Engine Soon lamp.
CODE 22
Trouble Code 22 indicates that the Throttle Position Sensor (TPS) is reading abnormally low. TPS volts should be close to 0.42 V at closed throttle and rise smoothly in about 0.02 volt increments to a maximum reading of about 4.85 volts at WOT
CODE 35
Trouble Code 35 is not used in the Turbo cars. If this code appears while a computer is connected to the ALDL connector, it is probably the result of a bad cable connection at the PC or the ALDL connector. Reseat the cable connections.
Not finding what you are looking for?

208 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...