Change front wheel bearings

Question 1

0helpful

1answer

Front wheel bearing will not come off on my 2001 hyundai tiburon. Is there something that I am missing since it is a drive wheel? I have unscrewed everything i can short of taking out the knuckle.

The wheel bearing is press in. Remove the knuckle and use a hydraulic press to remove and install a new one.

Apr 23, 2010 • 2001 Hyundai Tiburon

0helpful

1answer

Changing front wheel bearing 2003 tiburon how do i get the sensior off so i can take the bracket in to get the old bearing pressed out at the shop

There's one bolt holding the sensor in to the steering knuckle. Remove the bold an pull the sensor out.

When I changed my wheel bearing, the sensor was ceased in place and it broke when I tried to remove it. I had to drill out the bits of sensor that were stuck, then install a new sensor. The new sensor cost around $235.

Alternatively, you could follow the sensor wire to its connector, disconnect the wire and leave the sensor installed. But be aware that the sensor may be damaged when pressing the old wheel bearing out / new one in. In that case, the sensor would have to be replaced anyway.

Oct 17, 2009 • 2003 Hyundai Tiburon

0helpful

2answers

Rear wheel bearing hyundai coupe

just remove the wheel and count the teeth on the ring on the rear brake thats all you need to do. Since you can't drive it take it off and take it in to compare parts so you don't have to go back twice. You will need a new wheel seal and race and bearings.

Sep 29, 2009 • 2001 Hyundai Tiburon

1helpful

1answer

2001 Hyundai Tiburon makes grinding noise while in motion

Stay away, those need to be pressed into place with a hydraulic press, it is best to leave that to a qualified repair shop

Sep 28, 2009 • 2001 Hyundai Tiburon

0helpful

1answer

Wheel bearing

The front 'hub' bearing is 'pressed' out. You have to remove the steering knuckle from the vehicle and using a hydraulic press, replace the bearing by pressing out the old one and then pressing in the new one.

Sep 07, 2009 • 2003 Hyundai Tiburon

1helpful

1answer

What does it take to replace the front wheel bearings on a 2003 Tiburon

the front wheel bearings on your car are not sold except as a front wheel hub assembly with the bearing pre-installed, they run about $100.00 each, to replace them requires no special tools, all u do is remove the wheel, the brake caliper and the brake rotor and the hub nut, then the hub just slides off, u will most likely need a very large socket for the hub retaining nut.

Jul 05, 2009 • 2003 Hyundai Tiburon

1helpful

1answer

Cant find info or book on repairing the front wheel bearrings on my car,or even a "manual" for a 2001 Hyundai Tiburon!

Yes autozone.com has a repair guide for your car,you will be able to get the steering knuckle off,this is where the bearing is but ir requires a press or an equivlant to remove and replace the bearing.

May 25, 2009 • 2001 Hyundai Tiburon

0helpful

1answer

Front wheel bearing

This job is more than a none mechanic is able to do easily.

May 09, 2009 • 1998 Hyundai Tiburon

0helpful

1answer

What's involved in changing the front wheel bearings on a 2003 Hyundai Tiburon? Thank you

A whole bunch its toouch basically your overhauling that side taking off the wheel taking rotor off pulling out the hub dearing and pressing it back inlooking at approx 2-2.5 hors and then you made alignment but if you want to know exacxtly how to do this go to collisionrepairadvice.com its worth it

Mar 12, 2009 • 2003 Hyundai Tiburon

1helpful

1answer

Front wheel bearing keeps going out

you should check the hub carrier for damage or hairline cracks ok m8

Jan 04, 2009 • 2003 Hyundai Tiburon

Question 2

Marvin

Hyundai Master 85,242 Answers
Posted on Mar 12, 2009

Marvin

Hyundai Master

Joined: Jun 20, 2008

Answers

85242

Questions

28

Helped

29056633

Points

266281

U will need to remove the brake cailper and the the brake rotor, then the hub retaining nut, that is a large metric nut, the bearing and hub must come off, then u will need to take this hub to a machine shop or the dealer and have the new bearing pressed in.
BCA/NATIONAL Part # 510078 Change front wheel bearings - moreinfo.gif {Ball Bearing Bore=1.5354" Outer Diameter=2.9134" Width=1.4173"}
Front Wheel PRICE: $47.99, PART SOURCE: Rockauto.com

Answer 2

Anonymous

Expert 140 Answers
Posted on Mar 12, 2009

Anonymous

Expert

Joined: Mar 11, 2009

Answers

140

Questions

4

Helped

84202

Points

553

THE TIBURON IS FRONT WHEEL DRIVE, SO IT HAS A HUB ASSEMBLY.. TAKE THE WHEEL AND BRAKES OFF, THERE IS THREE BOLTS THAT THE HUB AS CONNECT IT TO THE CAR, AND ONE BIG AXLE NUT IN THE CENTER OF THE ROTOR.. THE ALL THE BOLTS OFF SLIDE YOUR AXLE OUT AND JUST REPLACE YOUR HUB BEARING.. IT SHOULD RUN YOU ABOUT $125 IF YOU DO IT YOURSELF..GOOD LUCK KEITH...

Related Topics:

Trustworthy Expert Solutions

Change front wheel bearings

2 Answers

Marvin

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Front wheel bearing will not come off on my 2001 hyundai tiburon. Is there something that I am missing since it is a drive wheel? I have unscrewed everything i can short of taking out the knuckle.

Changing front wheel bearing 2003 tiburon how do i get the sensior off so i can take the bracket in to get the old bearing pressed out at the shop

Rear wheel bearing hyundai coupe

2001 Hyundai Tiburon makes grinding noise while in motion

Wheel bearing

What does it take to replace the front wheel bearings on a 2003 Tiburon

Cant find info or book on repairing the front wheel bearrings on my car,or even a "manual" for a 2001 Hyundai Tiburon!

Front wheel bearing

What's involved in changing the front wheel bearings on a 2003 Hyundai Tiburon? Thank you

Front wheel bearing keeps going out

Not finding what you are looking for?

2003 Tiburon

Front wheel bearing will not come off on my 2001 hyundai tiburon. Is there something that I am missing since it is a drive wheel? I have unscrewed everything i can short of taking out the knuckle.

Ask a Question

Check Out the Latest Top Trucks Report!

Top Hyundai Experts

ZJ Limited

Thomas Perkins

Brad Brown

Are you a Hyundai Expert? Answer questions, earn points and help others

Manuals & User Guides

NOVOLOG%20-%20novo%20-%20Walter%20-%20...

. 2003 Tiburon Manual

Related Topics:

Trustworthy Expert Solutions

Change front wheel bearings

2 Answers

Marvin

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Front wheel bearing will not come off on my 2001 hyundai tiburon. Is there something that I am missing since it is a drive wheel? I have unscrewed everything i can short of taking out the knuckle.

Changing front wheel bearing 2003 tiburon how do i get the sensior off so i can take the bracket in to get the old bearing pressed out at the shop

Rear wheel bearing hyundai coupe

2001 Hyundai Tiburon makes grinding noise while in motion

Wheel bearing

What does it take to replace the front wheel bearings on a 2003 Tiburon

Cant find info or book on repairing the front wheel bearrings on my car,or even a "manual" for a 2001 Hyundai Tiburon!

Front wheel bearing

What's involved in changing the front wheel bearings on a 2003 Hyundai Tiburon? Thank you

Front wheel bearing keeps going out

Not finding what you are looking for?

2003 Tiburon

Front wheel bearing will not come off on my 2001 hyundai tiburon. Is there something that I am missing since it is a drive wheel? I have unscrewed everything i can short of taking out the knuckle.

Related Topics

Ask a Question

Popular Questions

How do you reprogram a key fob for a hyundai coupe?

Engine coolant has turned to a gel and engine overheated

Airbag light is on - 2003 Tiburon

Need timing belt diagram for

Tiburon sunroof problem

Check Out the Latest Top Trucks Report!

Top Hyundai Experts

ZJ Limited

Thomas Perkins

Brad Brown

Are you a Hyundai Expert? Answer questions, earn points and help others

Manuals & User Guides

NOVOLOG%20-%20novo%20-%20Walter%20-%20...

. 2003 Tiburon Manual