Question about 1997 Toyota Camry

Open Question

1997 Camry le that has a TDS 3-button keyless remote. he car key is separate. I want to know how to program my new replacement 3 button TDS, the old one works, but I want to replace with new one that

1997 Camry le that has a TDS 3-button keyless remote. There is a small round green button, a small round black button, and a large round red button on the remote. The car key is separate. I want to know how to program my new replacement 3 button TDS, the old one works, but I want to replace with new one that I bought. Both are The FCC# is ELVAT5G

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SHANNON GURLEY

  • 1 Answer

SOURCE: TDS 3-button keyless remote operating instructions please

RED BUTTON ARMS THE SYSTEM,GREEN DISARMS AND I THINK BLACK IS PANIC BUTTON.

Posted on Nov 16, 2010

Ad

Robert

  • 339 Answers

SOURCE: 1997 Camry le that has a TDS 3-button keyless remote. There is a small round green button, a small round black button, and a large round red button on the remote. The car key is separate. I want to kn

Go to yahoo.com and ask how to program fob.,

Posted on Apr 22, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need Programming instruction of ELVAT6B Keyless entry remote


the operators guide cover this.
hot reprogram key fobs , all cars. have the book in the glove boxl
and tells you how many keys you must have (WORKING) TO make a new key, some take 2 or 3 key s to DIY..

ask toyota for the guide. its free sometimes. (i wax safety issues and bam free, tell engine will not idle can car is dangerous.. bam. free guide.)

or go to , "buy a new key fob dot com." goggle finds them easy.
pretend to buy and aftermarket key
and bam free instructions. wow huh:?

Dec 19, 2014 | 1998 Toyota Camry

1 Answer

How to programme a clone keyless remote for 95 Toyota camry XLE Thanks


1 turn ignition to "on"
2 insert original remote into reader located in the glovebox
3 red security light should come on solid
4 insert new remote into reader straight after taking out old remote
5 new remote is now programmed

Jan 19, 2011 | 1995 Toyota Camry

1 Answer

Keyless remote stopped working, I replaced battery


The 1997 to 2003 Dodge Caravan and Grand Caravan use a standard key and remote setup with a separate remote fob. However, the 2004 to 2009 Dodge Caravan and Grand Caravan use a combination key and remote on one device. To program a new keyless entry remote for the 1997 to 2003 Dodge Caravan, you must have at least one functional remote, which is required to enter synchronization mode. To program the combination key for the 2004 to 2009 Dodge Caravan, you must have two functional combination keys. If you do not, you'll need to see an authorized Dodge dealer for keyless entry programming assistance.


2004 to 2009 Caravan Programming Instructions
  1. Insert one of your working combination keys into the ignition. Turn it to "On"; leave it in this position for about 10 seconds but no longer than 15 seconds. Turn it to "Off" and remove it.
  2. Insert your second working combination key into the ignition within 15 seconds of removing the previous key. Turn it to "On". After 10 seconds, you'll hear a chime and the "Theft" light will begin to flash, entering synchronization mode. Turn the key to "Off" and remove it.
  3. Insert the combination key you want to program. Turn it to "On." After 10 seconds, you'll hear a chime; then the "Theft" light will turn off. When the light turns off, the combination key--including the key and the remote--is programmed.
  4. Repeat Step Three for each combination key you want to program. A total of eight can be programmed.
Hope this help (remember comment and rated).


May 08, 2010 | 2008 Dodge Grand Caravan

3 Answers

TDS 3-button keyless remote operating instructions please


RED opens the drivers door, BLACK opens all the doors, and GREEN turns on the head lights

Apr 30, 2010 | 1998 Toyota Camry

1 Answer

How to program a new remote keyless entry for 2002


1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine). Wait for ignition chimes to stop.

3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
seconds.

4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the PANIC button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. Locks will cycle after each additional
remote is programmed.

6. Turn the ignition OFF and remove key.
7. Test Remotes.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Nov 02, 2009 | 2002 Dodge Durango

1 Answer

I need to program the key fob


. Enter 5-digit permanent entry code into the keyless entry driver door keypad. 2. Within 5 seconds of pressing last button of code, press the 1/2 button. All doors will lock then
unlock confirming you are in programming mode.

3. Press any button on first Keyless Remote within 5 seconds of pressing the 1/2 button. Locks will
cycle to indicate succesful programming.

4. If you are programming more than one Keyless Remote (Including any exsiting remotes) Press
any button on second keyless remote within 5 seconds of previous remote. Locks will cycle again
to indicate succesfull programming. (If the keypad light goes out before all remotes are
programmed the entire process must be repeated).

5. Press the 7/8 and the 9/0 buttons simultaneously on the keypad to exit program mode.

Jun 29, 2009 | 1997 Mercury Grand Marquis

2 Answers

Instructions to program 1999 Toyota keyless transmitter


sit in car all doors closed put key in ignition and turn from OFF to ACC 3 times as fast as you can leaving it in ACC on the last cycle then press your remote button. your blinkers should flash to tell you this has worked.... may take you a couple of tries to get it!!

Mar 17, 2009 | 1999 Toyota Camry

4 Answers

Keyless entry


locksmith or dealer

Jul 29, 2008 | 2007 Toyota Camry

Not finding what you are looking for?
1997 Toyota Camry Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...