2005 Toyota Corolla 1.6 Logo

Related Topics:

A
Anonymous Posted on Apr 20, 2013

2005 toyota Corolla lower control arm replacement

Lower Control arm replacement instructions

5 Related Answers

Anonymous

  • 1861 Answers
  • Posted on Sep 08, 2008

SOURCE: Lower Control Arm

Don't bother.If the lower control arm is cracked, it is a fair bet that the strut is bent. Even if the strut is not bent, you should have the alignment checked. The force of impact on this area to crack the arm can def be connected to other areas of extreme concern.

Ad

Anonymous

  • 1489 Answers
  • Posted on May 01, 2009

SOURCE: Lower control arms for 1994 camery LE

This is very difficult, even for an experienced weekend mechanic.

Anonymous

  • 365 Answers
  • Posted on Jun 14, 2009

SOURCE: 2005 Toyota Highlander Limited I have a right

Sorry...thats your only choice...but check with a 4X4 dealership parts counter.
Good Luck

Anonymous

  • 3 Answers
  • Posted on Jun 20, 2009

SOURCE: Lower control arms - bushings seperating

well considering the control arms are only $110 each yea they are taking advantage of you

Jonah Oneal

  • 14092 Answers
  • Posted on Oct 25, 2009

SOURCE: how hard is it too change lower control arm

ITS GOING TO BE HARD TO FIX AT HOME UNLESS YOU A PRESS AND TOOLS.YOU NEED A PRESS TO PRESS CONTROL ARM BUSHINGS IN AND OUT.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to replace ball joints and lower arm

You will need a pickle-fork to separate the lower control arm from the spindle, and then you will need a ball joint press to remove the ball joint from the lower control arm and to insert a new ball joint into the lower control arm.
0helpful
1answer

How to replace rear coil springs on a pontiac 2005 g6

you will to support the rear lower control arm, remove the through bolt to the spindle, and the bolt at the rear cradle for the control arm, then lower the arm and the spring should come out.
0helpful
1answer

Need to change lower control arm 2005 buick rainier

The entire arm or the lower control arm bracket which houses the infamous squeaky bushings?
0helpful
1answer

Replace Lower Rear Control Arms on 2000 Toyota Rav4

Hi Bren,here's a link to the rear lower control arms.In case you need to do the upper ones,here's a guide for it.Join the A.Z. site,it's free,then you can use there repair guides like me.
0helpful
1answer

How to replace lower control arm with balljoint on 2005 dodge strutus sedan

You need the repair manual. You will need some
hefty tools. The procedure is not that difficult, but
a few components have to be disassembled or removed
to access the lower control arm. I'm not plugging Haynes,
but their manual has step by step instructions.
0helpful
1answer

How to replace a front driver side axel for a 2004 toyota corolla

remove wheel
remove large nut in center of hub
unbolt lower control arm allowing the assembly to "swing" out a bit.
with a prybar, you will have to snap the shaft out on the transmission side to disengage the clip holding the shaft in.
0helpful
1answer

2005 S40 lower control arm

yes you can but you may run into sizing problems. I recommend just buy thelower control arm. Cause if you need bushing. the arm is wearing. Replace it
4helpful
2answers

2005 corolla , check engine light on and car shifts rough in lower speeds 20mph has rough shift as well as when you first put in forward or reverse? what is causing this?

Take your car to a Toyota dealership. Have them scan the car for trouble codes. If they come up with a P-2716 code, you need a new Engine Control Unit (the computer). If your car has under 80,000 miles on it, Toyota will replace it for free.
1helpful
2answers

Lower control arms - bushings seperating

well considering the control arms are only $110 each yea they are taking advantage of you
0helpful
1answer

Front wheel bearing replacement

Most hub assemblies contain bearings and race's that are pressed in and require special equipment to perform. Disassembly and removal of the unit then taking it to an establishment with the required presses will really lower labor costs though. To remove the hub you will need to unbolt the upper and lower control arms via the ball joints or strut along with unbolting of the transaxle and tierod end
Not finding what you are looking for?

155 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...