My wife went to start the car and the battery was dead so we jumped it and although the lights came on it still wouldn't start. when the jumper cables where put on the 4ways flashed and the blue security light on the dash came on. Ive tried to disarm it using the door locks and cant find any bottom under the dash. it still wont start and i am not sure what to do. a new battery seams likely
You'll probably have to let the dealer re-program the theft deterrent processor
Did u try unlocking the passenger door with the key?these are very common for the drivers switch goin bad
SOURCE: won't stay running 95 jeep grand cheerekee laredo 4x4
When you put the jumper cables on, put the key in the drivers door lock and unlock the door to deactivate the factory alarm.
SOURCE: security light flashing wont let you start jeep
the alarm seems to be activated. press the button and turn the key.
SOURCE: 1994 Jeep Grand Cherokee; good battery, cables,
Look for main fuse OR fusable link inline (in the main wire) to fuse box
SOURCE: My 1994 Jeep Grand Cherokee
If your battery has not been drained, try unlocking the lift gate or the passenger side door. That should disarm the alarm. You may need to get a jump if you're getting the flashing lights.
Another thing it does is to shut off your fuel pump. If you get it started after trying the above procedure, the issue is definitely your alarm system.
It is armed whenever you normally leave your car (using power locks seems to arm it on my 94 GCL.
There is a permanant disarming procedure on FixYA but it is pretty radical -- you have to find one of the wires that sends the signal to the alarm system from one of your door locks and ground it.
541 views
Usually answered in minutes!
×