1996 Toyota Camry Logo
Posted on Mar 11, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Toyota Camry power windows not working from master switch

I have a 1996 Toyota Camry sedan and am trying to figure out the problem with my master power window switch connection. My initial switch would only lock the doors and not control any of the 4 windows. I replaced the switch only to discover that the new one would share the same problem. I then replaced the 30 amp power window fuse, located underneath the steering wheel panel, and problem was temporarily resolved while switch was connected outside of driver's door panel housing. Once I secured the switch in door panel, I was unable to operate any of the 4 windows, but could lock doors. Could there be any other fuses within this circuit flow that I need to check? If so, please provide assistance!!!!!!!!!!

Answer This Question

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.
Sniper:

An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert 104 Answers
  • Posted on Mar 11, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.
Sniper:

An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

Joined: Dec 11, 2008
Answers
104
Questions
8
Helped
69951
Points
336

Their are two fuses that power this system. One is a 15 amp gauge fuse and the other one is a 30 amp main power fuse. You can also check the power main relay, your ignition switch, or i could possibly be a fault in the wiring

  • Anonymous Mar 11, 2009

    Sorry the gauge fuse is only a 10 amp

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the power window fuse on 96 camry
The power window master switch is supplied from the power main relay and M-fuse located in junction block 1, under the dash on the driver's side. See here p-9
http://www.turboninjas.com/camry/be.pdf
.
Read full answer
Aug 16, 2014 • 1996 Toyota Camry
0helpful
1answer

Power windows dont work
The problem could be in the window master switch on the driver's door, or in the power supply, main relay or fuse, see here, p84

http://www.turboninjas.com/camry/be.pdf
Read full answer
Jan 28, 2012 • 1996 Toyota Camry
0helpful
1answer

I do not have any power, on both the driver and passenger sides, for the windows or locks on my 95 Camry. I bought a new master switch, but that didn't work. All my fuses are good. Just trying to...
You may have a short pre fuse box.
Read full answer
Aug 10, 2011 • 1995 Toyota Camry
0helpful
1answer

1996 Toyota Camry DX .. The rear and passenger side windows don't work. It's obviously not the fuse, since the fuse is for every window.. Its not a motor, since that would be three motors blown at one...
Well seems you are on the right track, a common element but not the fuse. I would take the master window switch and the rear window disabling switch out and see if you cannot disassemble them to check for a breakdown in the conducting metal strips or the connector plugs. Some of them can be taken apart and the "points" cleaned with emery boards and erasers. Tough to find a new part for a car that old.
Read full answer
Nov 14, 2010 • 1996 Toyota Camry
0helpful
1answer

How do you remove the Camry 96 power window master switch? Do you have to remove the door panel? Thanks.
is this a 1996?? If so, the switch may be removed w/o the removing the door panel. Use a flat tip screw driver to pry the lower part upward. Be careful not to break the clip, they are fragile. Hopefully this help!!
Read full answer
May 04, 2010 • 1989 Toyota Camry
3helpful
1answer

Passenger side window will not go back up
No.The drivers master power switch is probably bad.YOu will have to perform a test on the three other switches on the master. Check for power and ground when you push each putton.If the master switch fails the test you need a new master switch.
Read full answer
Aug 01, 2009 • 2004 Toyota Camry
0helpful
1answer

96 camry only the drivers window works from the drivers door,it will not operate the other windows, and none of the other switches will work, I know all motors work, the master lock out is off
Check all fuses first! Do the other windows work from their own switches? If so, remove master switch, open it carefully as there are springs and parts. Spray switch contacts with electrical contact cleaner;available at most auto stores. If you know to use a test light and an ohmmeter, this is a big help to test all switches. Keep me informed.
Read full answer
Jun 13, 2009 • 1996 Toyota Camry
0helpful
1answer

02 toyota camry power windows all of them go down from master switch but only drver side widow comes back up with master switch,if i try to put left rear widow up with master switch right rear window comes...
left front door around the hinge area. there is a rubber boot inside that rubber boot are the wires for the windows. open it and you'll see some broken wires, stripped wires, etc. fix it.
Read full answer
Jun 03, 2009 • 2002 Toyota Camry
2helpful
1answer

1999 Toyota Camry-we've replaced the selinoide on both front doors; the problem we're having now is sometimes the locks work great (along with the windows) and then out of the blue all doors quick working...
I would be looking at replacement of the master control switch. The other possibility is a semi-broken wire that powers the master control. What I would advise: the next time it happens, remove the master switch and plug/unplug/replug the connector. See if that helps. If not, close and open the door whilst manipulating the switches. If the switches start working, you have a bad power feed wire.
Read full answer
Apr 06, 2009 • 1999 Toyota Camry
0helpful
1answer

1990 camry power window problem
It is rare that the power window relay will fail. Personally, I would look to see if there is power at the master switch on the driver's door. Anywhere. If the is NO POWER, you have a broken wire between the door & the LF kick panel where the wires come thru the body into the door shell. If there is power, the master switch is narmally the culprit
Read full answer
Jul 25, 2008 • 1999 Toyota Camry
Not finding what you are looking for?

View Most Popular

1996 Camry

  • Cars & Trucks

Related Question

Where is the power window fuse on 96 camry

  • 1996 Toyota Camry

Related Topics

2,189 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to fix diagnostic code p0442

2003 Toyota Camry

Electric front seat stuck

2003 Toyota Camry

I have relay saying :mg clt what is that mean?

2003 Toyota Camry

Starter making whining noise

1995 Toyota Camry

VSC Trac off lights on dashboard

2003 Toyota Camry

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...