SOURCE: engine will not turn over, already changed fuel pump
If you want to keep guessing, you just might get lucky after you've spent hundreds of dollars on parts you don't/didn't need. If you could tell us which (if any) DTC's (Diagnostic Trouble Code) are stored in the ECU (Engine Control Unit), we might be able to help you identify the problem and cause. The other solution is tow the vehicle to the nearest Hyundai Service Dept and have a qualified technician diagnose the problem. They'll give you an estimate of repairs (parts, labor, tax, time frame, etc.).
SOURCE: have 2005 accent no power to the fuel pump. fuel
I had this problem with a 1991 ford taurus. The fuel pump relay went bad.
SOURCE: My 2003 Senata died while driving. Replaced the
Firstly stop changing pieces willy nilly as it costs money and is unnecessary ,firstly go back to basics and remove a plug lead and then put a old plug into it and hold this against the cylinder head and see if you have a spark ,then answer this post
Hello
The engine
and automatic transmission in this vehicles drive train
are fully electronically controlled by a computer called the PCM
(Power Train Control Module). Whenever a problem like this occurs the
computer stores a record of the problem (there are of course some
exceptions to this, like the fuel pump, engine coolant temperature
sensor and MAF sensor for instance) in the form of a fault code in
its memory, to read these fault codes you must have the systems
memory scanned with a special tool. Once the fault code(s) are read
you then must perform the appropriate diagnostic testing to find and
resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A
TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR
HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM
149 views
Usually answered in minutes!
×