Want to know about this code reader

1999 car in USA?
Innova what model is it.? best is the one that does all FORD factory codes too. P1xxx UP,etc.
Innova, OBD2, scan tool (I have 2)
here are the steps,
1: fresh batteries in INNOVA 3x, AAA .
2: fuse that runs pin 16 power on OBD2, Power in not dead but is 12vdc or it fall fails. (car fuse for this pin not blown)
3: connect INNOVA 16pin plug to 16pin jack at knees dash edge
4: turn on INNOVA and scan . , the manual if free, if lost.

Question edited for clarity.

ABS code

Code 61-1 and 62-1; ABS Battery Voltage High Malfunction

https://www.elementownersclub.com > threads > code-6...
Sept 18, 2016 - Having recently purchased an 06 Element, I'm in the process of going through everything. When I bought it the airbag light was on and ...

abs code 61-01 - Honda Civic Forum

https://www.civicforums.com > ... > Brakes
Brakes - abs code 61-01 - My 07 civic EX is vibrating, at startup and idle, definately coming from right front . Vibration diminishes with RPMS.
Missing: 3020b, ‎' Must include: 3020b,

Support - Code Library - Innova

https://www.innova.com > pages > dtc-library
Enter your vehicle's make and the diagnostic trouble code shown on your innova tool to find out manufacturer specific information about the code being displayed ...
Missing: 61-01 ‎' Must include: 61-01

• 
  

  Manual_3020a_E.pdf - Innova

  https://csr.innova.com > Content > Manual > Man...
  PDF
  This manual describes common test procedures used by experienced service technicians. Many test procedures require precautions to avoid.

The models of the two cars are different, and the codes should also be different. Kijang Innova can only read its own code.

The 2003 uses a different protocol (software) to read codes, you need a new scan tool.

the code should be longer.
my jeep has a huge list of C1xxx codes.
did you scan it first? that be FIRST.
only a real scan tool can show all codes.
the Innova 3160 scan tool does see all jeep codes. btw.
that is what I use. not ever working blind....

i have the FSM book on this jeep
scan it and we can help.
but i bet you dont want to buy one or rent one or have any shop in town do it....

any scan tool , is best.
code reader are near useless, about equal to a trip to autozoned.
get a real scan tool and see it all, get one that can read
all factory Jeep codes.
i use an Innova 3160.

Could be a bad sensor

Could also be a mechanical issue

Timing Chain or Belt problem

DO NOT throw parts at it

How do you like that code reader?

I'm thinking about an Innova 31603

I have professional scan tool software,
but takes time to set up, to just get a quick
code check & look at I/M Monitors

That's nothing but a generic code reader. You need a professional, bidirectional scan tool to do that.

The code scanner that you need is called ODBII code reader with ABS, and it works in the same way as the one that you connect to the car computer module (ECU) to read codes when the check engine light comes on, but the cheap ones that you can buy from $50 do not have the ABS brake scan function.

If the problem is the ABS, then it is often a wiring to abs problem, or a defective ABS control module, a scan reading is necessary to know what the problem is.

Below few examples of Code reader with ABS:

Equus 3150 Innova ABS + Professional CanOBD2 ...


$199.00 - Amazon.com


Cp9449 Brake Scan Abs Diagnostic Tool Obd2 ...


$219.67 - eBay


Equus 3160 Innova ABS + Professional CanOBD2 ... $259.99 - Amazon.com


CAN OBDII Code Reader with Multilingual Menu $49.99 - Harbor Freight Tools

Are you using an Innova code reader? I had this when I used one of the Innova 3030 code readers. I called and they said they were QC codes from manufacturing.