1990 Chevrolet K1500 Logo

Related Topics:

A
Anonymous Posted on Apr 08, 2013
Be the first to answer

Cruise control not working 1990 chevy k1500

Will not work at all had problem before replaced two wire directional switch

Answer This Question

4 Related Answers

Anonymous

  • 2 Answers
  • Posted on Dec 29, 2008

SOURCE: blower control switch

I had this same problem and it turned out to be a simple fix,my problem was the hot wire contact on the blower itself.Fix was cleaning the contact w/sandpaper and replacing the part on the hot wire that connects to it.

Ad

Anonymous

  • 4 Answers
  • Posted on Apr 21, 2009

SOURCE: 1994 CHEVY K1500 BRAKE LIGHTS DON'T WORK TOP CAB LIGHT WORKS

I figured out my problem!
From the VERY BEGINING... I changed my brake pedal switch with a BRAND NEW switch, and the lights still didn't work.

Well, I went back down there with a live wire and touched the contacts..and guess what.. the brake lights lit up!

I got a faulty NEW brake pedal switch!! I went a year with this problem, so learn from my issue, test even your new parts if it doesn't fix the problem to completely rule it out!

I hope you guys figure out what's going on with your issue.

Mark

  • 141 Answers
  • Posted on Jun 09, 2009

SOURCE: I have 1994 chevy silverado. Cruise control

first check the fuse for the cruise control

Anonymous

  • 52 Answers
  • Posted on Jul 08, 2009

SOURCE: cruise control no longer works. Cruise light comes

Make sure the cable from the cruise control motor to throtle is not broken or unattached.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Cruise control not working 1990 k1500 4x4 cruise control not working were are all the parts located and what to look for
take the cover off the cruise control actuator located on the firewall in engine compartment remove the cover and see if the ribbon is broken that actuates the cable to the throttle,then ck the brake switch adjustment,if all is ok the switch on steering colum is bad to replace this you grasp the whole handle firmly and rotate it toward front of veh while pushing in toward colum,the wires go through the colum and are attatched under dash,attatch a fine stiff wire at connector and pull out then attatch thin wier to new switch wire and pull back through colum
Read full answer
Sep 22, 2014 • 1990 Chevrolet K1500
0helpful
3answers

Crusie control does not work on 2011 gmc sierra 1500 and I've already replaced the switch?
If the switch is replaced,then it can be wiring issue or faulty cruise control board.But as the switch is replaced,get the voltage at the switch tested to confirm the switch is actually receiving voltage.If no voltage received at switch power supply wire then ,apply external 12 volt power to the cruise control switch wire and then see if cruise control comes ON.If yes,then you know wiring is issue.
=============

On this case, to troubleshoot this problem, there are solved help links. Click the link directly and refer the details to solve this problem yourself, with help of diagrams: ------

Ford ranger cruise control not working? http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html

-----------

Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------

Horn and cruise control not working on Plymouth Grand Voyager?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------------

Horn and Cruise control quit working on 2003 Jaguar S-Type?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

-------------

Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500

http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------

Cruise control stop working on 1994 Ford ranger?

http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

----------

Cruise control not working?

http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

--------------

1996 Ford Explorer: Cruise Control Wiring Diagram?

http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html

----------

These will help.

Thanks.

Read full answer
Nov 28, 2012 • GMC Cars & Trucks
0helpful
1answer

My cruise control doesnt work on my 1991 GMC Sierra K1500, I have put in a new actuator but it still doesnt work. What I need to know is what fuse runs it, what,if any relays are involved, and if the...
Wiring, schematic, electrical diagrams, fuse diag, error codes, torque settings etc are basic contents of these online books they have here on this website www.reliable-store.com I have attached. Must check it out
Read full answer
Feb 28, 2018 • 1991 GMC K1500
0helpful
1answer

1989 chevy k1500 electric passenger window not working
I sounds like it might be a window switch that has gone bad ck the connector at the window motor by connecting a test light across the 2 wires operate both window switches the test light should light If it doesnt then connect the test light to a good ground and back prob the connector on either wire and operate the switch in both directions the test light should light In one position of the switch then ck the other wire the same way and the test light should light up with the switch in the other position (down up) wich ever wire the test light does not light up on needs to be cked for a break. The wires in the the door pass through (the rubber boot that goes from the door to the body ) can break pull the boot loose and pull the wiring out as far as possible to ck for broken wires.
Read full answer
Mar 08, 2010 • 1990 Chevrolet K1500
6helpful
2answers

1990 GMC Sierra 1500 pickup. Windshield wipers, Cruise Control
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
Read full answer
Feb 05, 2010 • 1990 GMC Sierra
0helpful
1answer

I have 1994 chevy silverado. Cruise control
first check the fuse for the cruise control
Read full answer
Jun 09, 2009 • 1994 Chevrolet K1500
1helpful
1answer

1981 chevy truck headlights not working
Replace light switch. Reach under the dash and find the switch you will feel a button on top of the wight switch push it down pull the switch knob all the way out, (Unhook battery first) then unscrew the beauty ring then pull the switch down and then remove wire connector and go buy a new one and replace it. if your a big guy it may give you a problem, but replace it before it burns up your wiring harness.
Read full answer
May 30, 2009 • 1990 Chevrolet K1500
2helpful
1answer

Replaced TH700R4 on 1988 c/k1500.now cruise control and speedometer do not work.tested vss & wiring from vss to cruise control module and from ccm to powertrain control module.both check good. Repair...
I would look at the wiring around the bellhousing first to be sure you have not pinched any wires. On that truck, behind the glove box is the PCM, and another white colored box called a DRAC. The DRAC controls the speedometer not the PCM. Look into replacing it. Also check your trans and gauge fuses. Good Luck.
Read full answer
May 06, 2009 • 1988 Chevrolet K1500
1helpful
1answer

My cruise stopped working on my 1991 GMC Sierra 1500 while I was driving. I did a continuity test on the brake switch and it works fine. Any ideas?
Check your cruise control fuse or relay. It will be in your owners manual. If fuse is good than the cruise itself may be faulty. Check continuity on cruise controler itself. If there is power, than the controller itself is bad and need to be replaced. If there is no power than it may be a faulty switch.
Read full answer
Apr 24, 2009 • 1991 GMC K1500
0helpful
1answer

Cruise control quit working today
Check for vaccum hoses attached to the cruise control module in engine compartment. These hose may be try rotted and your loosing vaccum when you activacte cruise control.
Read full answer
Mar 22, 2009 • 1989 Chevrolet K1500
Not finding what you are looking for?

View Most Popular

1990 K1500

  • Cars & Trucks

Related Question

Cruise control not working 1990 k1500 4x4 cruise control not working were are all the parts located and what to look for

  • 1990 Chevrolet K1500

2,159 views

Ask a Question

Usually answered in minutes!

Popular Questions

4.3 Firing order diagram for 4.3L v6 Chevy engine

1999 Chevrolet K1500

Where is the bank 2 sensor 1 located.

1996 Chevrolet K1500

Needing to convert degrees to

1999 Chevrolet K1500

How do i set timing on 1998 chevy truck 350 vortec

1998 Chevrolet K1500

I need a diagram for a 1994 chevy silverado fuse box

1994 Chevrolet K1500

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...