I need progmation the control key the ford focus

Try the following see if that helps.


Published on 30 Oct 2012
1. Turn the ignition from OFF to RUN 4 times within 6 seconds.

2. Turn the ignition OFF. The system will chime to confirm programming mode.

3. Within 20 seconds, press any button on first keyless remote. The system will chime once to confirm programming.

4. Within 20 seconds, press any button on second keyless remote. System will chime once to confirm programming.

5. Turn ignition to RUN to exit programming mode.

yes. blank key from hardware store will just unlock the doors

I have a key to start my car but no key to unlock my trunk and i have look for a lach it is a 2000 ford focus how can i get in or if i get a key made would it work

Very common issue for this model. She needs to buy a buildable ignition from the dealer and get the key code with her vin # so she can make it match her anti theft key, then the ignition lock cylinder needs to be drilled out to remove it.

Same thing happenned to me. Dealerships couldn't help, so I had to call Ford Motor Company... the gentleman on the phone was able to give my local dealership the code for security reasons. Then, you just need to have the new key cut and programmed at the dealership. I'm sorry I don't have the number handy. Best wishes

need to get a chip key made, either by dealer or by locksmith will cot upwards of 150.00

have you tryed to turn the steering a little bit, at the same time turn the key.

And what is the rest of the question?

there should be a button on the bottom of the column to release the key from the ignition ad put the ignition in the lock position