Question about 1993 Ford F250
Truck has set all winter, problem being the starter went out, changed the starter...no start, no fire....since then ive changed the distributor, cap, pick up coil, plugs, wires, and the coil....still no fire
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1) #1-4 pass side front to rear #5-8 drivers side front to rear
3)#1 is usually marked on cap wires go ccw
4) TDC #1 cyl you must remove the shorting plug before timing
it is located by the dist plug or the ignition module small gray plug
Posted on Dec 13, 2008
i got a 1994 f150 that starts but cuts right back off so i had no fuel psi so i put a new fuel pump and fillter then found out that it was not getting power to the pump the cut off is not triped and no brakes in the wires can anyone help??
Posted on Sep 10, 2009
Try this. If the distributor is in the right way, the clips that hold the cap on should be just a hair off of 12 o'clock and 6 o'clock. #1 is positioned at 1 o'clock, which is at the firewall side of the distributor. The firing order is 1-5-4-2-6-3-7-8and is counterclockwise from #1. The passenger's side is cylinders 1-2-3-4, from the front of the car. The driver's side is 5-6-7-8 from the front. Hope this will help.
Posted on Feb 07, 2010
Tips for a great answer:
Sep 13, 2013 | Cars & Trucks
Feb 27, 2011 | 2004 Ford F250
Feb 09, 2011 | 1993 Ford F250
Sep 06, 2010 | Ford F-250 Cars & Trucks
Aug 30, 2010 | 1993 Ford F250
Apr 21, 2010 | 1993 Ford F250
Sep 20, 2009 | 1993 Ford F250
182 people viewed this question
Usually answered in minutes!