Cant hotwire your vechicle has the PATS SYSTEM.your keys has transponder on it.the ignition switch antenna ring and immobilizer control module and ECM read signal emitted from the keys transponder if you have no keys or wrong keys the PATS SECURITY SYSTEM DISABLE IGNITION SYSTEM CAR WONT CRANK.CANT HOT WIRE CAR WITH THE PASS KEY SECURITY SYSTEM.older cars back in 70s you could hot wire newer cars you cant.
SOURCE: Failed evap test on 1995 mazda b2300
did u try hoses that go to evap canister? and the evap canister itself? Thanks, Lee
SOURCE: 1994 mazda b2300 turns over fine but won't start
There is a fuel pump "roll over" valve in the floorboard on the passenger side. It stops the fuel pump from running incase you roll the vehicle to prevent a fire. Check that the switch didn't trip from someone possibly kicking it or something. Then check any fuses or relays (swap relays if you have a spare or switch with the same on in a different slot). If everything checks out ok, then you probably need a fuel pump
SOURCE: someone tried to steal my 2002 mazda b2300
You'll need a new ignition switch. After installation, the dealer can either reprogram your old keys or you can buy a new key and have it programmed.
SOURCE: overdrive light stay on on my 1995 mazda b2300
MY 1995 MAZDA B2300 DOES NOT ENGAGE THE OVERDRIVE LIKE IS USED TO BEFORE, WHAT COULD BE THE PROBLEM?
SOURCE: 1994 mazda b2300 wiper motor
remove the wiper arms. then remove the cowl . the wiper motor then can be accessed for removal.
1,158 views
Usually answered in minutes!
×