Cruise control not working on jeep patriot - 2007 Jeep Patriot Limited

SOURCE: the cruise control stopped working on my 1988 cherokee

check your vacuum hoses to the servo

SOURCE: 2005 Jeep Wrangler Cruise Control

no fuse ...sounds like the switch may have gone bad

ZJ Limited

• 17989 Answers
• Posted on Aug 04, 2009

SOURCE: cruise control not working

Review this information about Jeep-WJ-Cherokee-Service-Manual-PDF-08W-Diagrama-de-Cableado (Wiring Diagrams / Section 8W Page 181 (8W 33-1)

Is in spanish, but the graphics can help you.

Good luck!!!

SOURCE: 2003 jeep grand cherokee cruise control not working.

Ok, the '03 Jeep Grand Cherokee uses a small vacuum line to control the servos. Since your light comes on, it's obviously getting power. 9 out of 10 times it's the vacuum hose.
Pop the hood and look on the passenger side towards the back for the engine coolant reservoir. It's most likely underneath it so you may have to remove the res. Check the vacuum hose and all vac. connections then check the electrical connections. If that's not the problem, check the cruise control connection to the throttle linkage.
If that still doesn't do it, you may need use scan tools and diagnostic procedures that are out of the scope of home mechanics.
Wish ya luck!