Cars & Trucks Logo

Related Topics:

Posted on Apr 04, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Good night boss, i have got a renault kangoo .... with 1.4 lt engine, at the momoent car is not running,, theere is no spark at the plugh,, relay clicks when turning ignation is on but found no spark when cranking the engine, i have checked all the fuses and they are ok. i also checked crank angle sensor for continuity and it is ok, please advise what else to check,,, thank for your time regards. s

1 Answer

Mai Lor

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Cars & Trucks Master 2,558 Answers
  • Posted on Apr 04, 2013
Mai Lor
Cars & Trucks Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Feb 18, 2013
Answers
2558
Questions
0
Helped
524707
Points
7053

-You already have spark. Next check fuel and power at injectors.

mai Lor

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Feb 08, 2009

SOURCE: Engine died while driving, cranks but won't start.

not all scanners a created equal. You need to check for trouble codes...............but it must be fixec by now.

Ad

Anonymous

  • 360 Answers
  • Posted on Oct 10, 2008

SOURCE: car will just turn over

main relay contacts get burned up...... common on the hondas its under the drivers side dash

Anonymous

  • 99 Answers
  • Posted on Dec 01, 2008

SOURCE: changed spark plugs and timing belt, engine won't start dtc po336

I had this problem before, they way i got round it was to put the sensor just say half way in until the engine sound good on tick over, once that is good make a spacer to keep it like that...or.. like i did buy a new sonsor.

Anonymous

  • 1 Answer
  • Posted on Mar 19, 2010

SOURCE: no spark no fuel no start! replaced and checked

funny thing is I have a 2002 GTI with the exact same problem. have spent the last three days at work trying to figure things out.. best of luckn email me if you figure anything out. [email protected]

Steve Banks

  • 232 Answers
  • Posted on Aug 01, 2011

SOURCE: Renault Kangoo, horn not working,

Horns are pretty simple units and don't need to feed through the ECU.
When you say you have checked the wiring and tested it, do you mean the wiring at the horns? or the wiring at the horn button on the steering wheel pad or where ever your horn button is located?
Sometimes the horn button breaks usually due to wear, If that is the case you will need to remove the horn pad or button and check/repair or replace. If this is working then most likely your horns are dead, not usual as they are fairly robust but not unheard of.

Testimonial: "Fantastic response time, and also expert advice. I now have other leads to investigate. Many thanks"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to connect spark plug wires on my Renault Kangoo II 2010 (4-cil 8v petrol)

Connecting new spark plug wires on your Renault Kangoo II 2010 (4-cil 8v petrol) can be a bit tricky, as the correct order and routing of the wires is important for the engine to run properly. Here is a general guideline on how to connect the spark plug wires:
  1. Locate the coil pack. It is typically located near the engine, and it is a rectangular housing with four spark plug wires connected to it.
  2. Remove the old spark plug wires. Carefully remove the old wires from the coil pack by pulling them straight off.
  3. Label the wires. Before you remove the old wires, it is helpful to label them so you know where they came from. This will make it easier to connect the new wires in the correct order.
  4. Connect the new wires. Carefully connect the new spark plug wires to the coil pack. Make sure to connect them to the correct spark plug tower on the coil pack, and route them correctly.
  5. Start the engine. After connecting the new wires, start the engine and check for any misfires or problems.
It's important to have a good understanding of the engine and the spark plug system, and to be familiar with the tools and materials needed to do the job properly.
It's also important to refer to the vehicle's service manual for specific instructions on how to connect the spark plug wires, as the order and routing of the wires can vary depending on the make and model of your vehicle.
1helpful
2answers

How do i fix my car engine running fast but not stsrting

It is probably a broken wire or shorted coil pack
0helpful
1answer

How do i start a renault kangoo no spark coming to plug

Have you tried another plug? it could be a duff plug you are trying, if that is ok you may have a slight crack in the distributor head or it is shorting out, get some one to try to start the car at night time, find the darkest place possible, you look under the hood and if there is a short you will see the spark tracking. If this does not work you will need someone to run a meter over it to find the fault.
0helpful
1answer

Where can i find the transmission type for a Kangoo 1.4 automatic

Renault Kangoo (KC) 1.4 i car data and specifications. Renault Kangoo (KC) 1.4 i car information and specs Bodywork Bodywork type Minivan Length (mm) 3995 Height (mm) 1827 Width (mm) 1663 Number of seats 5 Number of doors 4 Wheelbase (mm) 2600 Track rear (mm) 1418 Track front (mm) 1405 Ground clearance (mm) 140 Total (curb) weight (kg) 1155 Gross (max.) weight (kg) 1665 Max. cargo capacity (volume) 2600 Min. cargo capacity (volume) 650 Tires 165/70 R14 T Engine Engine displacement (cm3) 1390 Engine location Front, transverse Cylinder type In-line Bore (mm) 75.8 Number of cylinders 4 Compression ratio 9.5 Stroke (mm) 77 Valves per cylinder 2 Turbo - Fuel supply Distributed injection Engine power (hp) 75/5500 Engine torque 114/4250 Transmission Wheel drive Front Number of gears (automatic transmission) 4 Steering Type of steering Wheel-rail Power steering Hydraulic system Brakes Brakes rear Drum brakes Brakes front Ventilated disc brakes ABS + Performance Acceleration to 100 km/h 17.3 Fuel capacity (l) 50 Fuel consumption - city (l) 9.5 Fuel consumption - road (l) 6.3 Top (maximal) speed (km/h) 147

Renault Kangoo (KC) 1.4 i car bodywork specifications: Renault Kangoo is a minivan with 5 seats and has 4 doors. Dimensions information of car: 3995 mm long, 1827 mm high, 1663 mm wide. Other Renault Kangoo (KC) 1.4 i cars specs: 2600 mm wheelbase, rear track has 1418 mm, front track has 1405 mm, ground clearance - 140 mm. Total car weight is 1155 kg and 1665 kg of maximum weight, cargo capacity (volume) if from 650 to 2600. Tires type for Renault Kangoo (KC) 1.4 i is 165/70 R14 T. Car engine specifications: 1390 cm3 displacement, located front, transverse with in-line cylinders, 75.8 mm bore. Renault Kangoo (KC) 1.4 i has 4 cylinders. More car engine information: 9.5 compression ratio, 77 mm stroke, car has 2 valves per cylinder, distributed injection fuel supply type, engine power 75/5500 hp, engine torque equals 114/4250.
Transmission specifications of Renault Kangoo (KC) 1.4 i wheel drive is front, it has 4 gears of automatic transmission,.
Renault Kangoo (KC) 1.4 i has wheel-rail type of steering. And hydraulic system power steering.
Rear brakes are drum brakes. Front brakes specs: ventilated disc brakes.
Performance Renault Kangoo car data: it takes 17.3 sec. for Renault Kangoo (KC) 1.4 i to get 100 km/h speed. 147 km/h is the max speed. Renault Kangoo gasoline tank has 50 liters capacity. The car consumps 9.5 liters in the city, 6.3 liters on the road.


TMTM

1helpful
1answer
0helpful
1answer

Bypass imobalizer on renault kangoo 1.5dci 2003

my kanggo burned 2 months ago at 1,30 p.m. ; tha car was parked outside my house and was stopped sonce 5 hours before. The firemen that estiguished the fire reported taht was an autoself fire provocated from a short circuit in the elctrical connection.Please let me know if somebody knows about otehr inconveninet like mine.Thanks
2helpful
2answers

Where is central locking relay found on kangoo van w reg

Either with the fuses, or under the bonnet near to the bulkhead, possibly passenger side
4helpful
1answer

Renault kangoo indicators and hazard lights have stopped working, checked the fuses there ok. Could you help?

Most common cause is a failed indicator relay. Just swap it with a known good one to confirm whether it's faulty but ensure it's correctly rated for your Kangoo.

After that, the next most common causes are more expensive: the indicator switch and the hazard light switch.
Not finding what you are looking for?

83 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...