At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove the two bolts on the bottom portionof the rear seat cushion.Pull the tabs along the bottom portion of the rear seat cushion until it unhooks from the floorboard mount. Pull the cushion out of the back seat area and set it down. Remove the anchor nuts. Push the seatback toward the rear and up to disengage it from the hangers. Pull the rear seatback out of the Grand Prix, preferably with the help of an assistant. Is there anything else you need?if you need an auto tool you can click here: great tools
The bottom cushion pulls up with a finger tab located on the rear of the cushion by the door. Then there is a release lever located on the top of the back rest next to the head rest. You will need to remove the head rest for the seatback to lay completely flat.
The rear seat bottom cushion is attached with hooks,no tools should be needed to remove the seat bottom.lift slightly up on the cushion with one hand,and use the other hand to "thump" the front of the cushion towards the back of the car.(one hook on each side,thump the seat about 12" from the side)
On each side of the back seat (the part you sit on), there is a loop. Pull this up, and the seat cushion will swivel up towards the front seat back. Visible at the lower corner of the seat back, is a lever that tou can pull up ( the earlier versions needed to be pushed down or back). The seat back will then fold /down/forward. The headrest must be removed so that the seat back can fold flat. The headreat can be removed by turnibg the small knob at the base of one of the head rest shafts. There is a small arrow indicating the direction of rotation to accomplish this.
×