I just bought this car and when i first turned it on i noticed the radio has no power what so ever, checked the fuse in the back and in the panel on the driver side... theyre both good.. i have taken the radio out and all the wires are connected. The back light doesnt even come on so im not sure what else to do.. the car did sit for a while and battery probably did die but i dont think its in safe mode because im pretty sure it would just say it on the screen but theres nothing... someone help please lol
SOURCE: radio stuck in safe mode
Turn on radio - the word SAFE will appear in the display. Press th
P.SCAN and RBDS buttons simultaneously and hold them down until "1000"
lights up in the display.Release buttons.Do not, under no circumtances,
continue holding them down or press them once again. This will cause
the radio to consider the number 1000 to be the input code.Use station
buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use
the button 1 to enter the first number 2 for the second number 3 for
the third number and 4 for the last number.Once you have entered the
code and it shows on the display,press the P.SCAN and RBDS buttons down
again simultaneously and hold them down until the word SAFE appears in
the display.Release buttons. Soon afterwards a frequency will be
displayed.
PLEASE RATE THIS !!!
SOURCE: 2001 Audi A4 radio in safe mode. Battery was
sorry to say, you will need to take it in, it needs to be hooked up to their computer to reset and have it start up poperly. It just like a pc when it crash it will try to start in safe mode until you select "Normal" start up
SOURCE: JUST BOUGHT 1999 AUDI A6 QUATTRO WITH CONCERT
IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!
128 views
Usually answered in minutes!
×