Hi My 2001 6 cylinder wont start but all the lights work and so does the radio. Is is still the battery. If so what is the proper way to jump a car
2001 dodge stratus with 3.0 wont start no spark no fuel also radio wont come on nor will the top lights when i open the doors
I've heard that th starters they are using in the dodge cars are goine BAD. So answer this , will it try to crank or is it just cranking and not starting?
replace the starter, go to an auto place and ask for a starter for your specific car. if they do ot have one ask if you can order 1. i recommend auto zone. also ask them if they think it will help. you might need to buy a wrench to do the job because its in a tight spot. if it doesnt work you should be able to retunit but takeyour old one off first so you can show them.
replace the starter, go to an auto place and ask for a starter for your specific car. if they do ot have one ask if you can order 1. i recommend auto zone. also ask them if they think it will help. you might need to buy a wrench to do the job because its in a tight spot. if it doesnt work you should be able to retunit but takeyour old one off first so you can show them.
×
Proper way to jump your car is to attach the jumper cable clamps to the marked posts on your car...on the vehicle that is jumping you, attach the positive clamp to the positive post and the negative clamp to some piece of metal on the vehicle...can even be a screw as long as it sparks a little (grounding). Don't connect the clamp to the negative post.
1,812 views
Usually answered in minutes!
Thanks for your help but I am not quite sure I understand are you not suppose to connect the negative clamp to the negative terminal? Just to any part in the vehicle?
We've replaced the battery and the car acts like it wants to start but the engine won't turn over. Any suggestions?
No the car will not crank at all. I believe that the starter is dead all together
When I try to start the car the engine will not make a sound at all. All lights, radio, fans, dashboard work perfectly fine. Last week I got a problem code of P1684. What does that mean? Help!
×