Power lift on 2007 Nissan Quest 3.5 se does not work

SOURCE: I need to replace my Nissan Quest 2007 in cabin micro filter

I'm going to send you exploded view of the glove box and the in cabin micro filter cover illustration. Remove the two upper screws on the glove box and carefully pry metal clips loose.
Disconnect glove box lamp electrical connector. Do not let glove box assembly hang from glove box lamp harness.
Remove three lower screws and remove damper clip from glove box door. Separate glove box housing and passenger instrument lower panel.
Remove three screws and remove in cabin micro filter cover.
Remove in cabin micro filters from front heater and cooling unit assembly.
Note When installing two new in cabin micro filters ensure that the filters are facing in the direction indicated by the direction arrow for the airflow. Direction arrow is printed on side of in cabin micro filters.
Install in cabin micro filter cover. Reinstall glove box.

Testimonial: "Finaly I found the air flow door with three screws and removed it. The filter will need replacement soon. It is been replaced one time at the dealer."

SOURCE: 95 nissan quest front passenger side power window does

driver side switch is not working replace it

SOURCE: 2007 nissan quest, brake lights have stopped

how about criuse control it also not working you may have bad switch 3 wire switch at brake pedal are harder to diagnos 2 wire one wire has power till you press the pedal most all cars brake light is fusible link or special fuse for it is on all the time. If no pwr even with key off at the brake switch key on or off on any wires then you may need to find pwr. to the system , Note if any fuses are burnt repalce them same type if that fixes something yeah but it also may return .

SOURCE: 2007 nissan quest power lift gate problem

check the hydrolic struts on the lift gate