Flashing engine light 96 gmc Sierra 5.7 vortec engine

SOURCE: Brake lights quit working.

if all fuses and bulbs are ok get to the brake switch and see ifits stiff or stuck, if it just has two wires on it you could join themtogether to see if the brake lights come on though obviuosly dont leave them joined.Good luck davelee

SOURCE: 96 gmc sierra hard to crank after 12-14 hours

that has a votec engine in it the fuel pressure is droping at knight and it takes 60 psi before the injectors will fire most likely cause fuel pump ,leaking injector ,or a feul pressure regulator

SOURCE: location of crankshaft position sensor on 1999 gmc

passenger side behind the starter

SOURCE: Where is the oil pressure sensor located on a 2003

It is on the top backside of the engine block, behind the intake manifold mounted into the top of the block. You will have to lean up over the engine to see it.

Testimonial: "Thanks for the help"

SOURCE: I need the firing order of 1996 gmc engine sierra

For the 1996 GMC SIERRA with 5.7L V8:

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
.........(back).........
|...8...|........|...7...|
|...6...|........|...5...|
|...4...|........|...3...|
|...2...|........|...1...|
.........(front)

Distributor Connections:
............(back)
Coil--->o
6------->o........o<-------5
4------->o........o<-------3
2------->o........o<-------7
8------->o........o<-------1
.............(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!