What is the firing order for a 1996 honda civic

SOURCE: How to change upper control arm on 1996 Honda Civic DX ?

UPPER CONTROL ARM:

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.

1. Raise and support the vehicle safely.
2. Remove the front wheels. Support the lower control arm assembly with a floor jack.
3. Separate the upper ball joint from the steering knuckle using a ball joint separator tool.
4. Remove the self-locking nuts from the upper arm anchor bolts. Remove the upper arm from the vehicle.

1. Install the upper control arm assembly into the strut tower.
2. Connect the upper ball joint.
3. Install the front wheels and lower the vehicle.
4. With all four of the vehicle's wheels on the ground, torque the upper control arm nuts to 47 ft. lbs. (65 Nm). Torque the castle nut to 32 ft. lbs. (44 Nm); then, only tighten it enough to install a new cotter pin.
5. Tighten the wheel nuts to 80 ft. lbs. (110 Nm).
6. Check and adjust the vehicle's front end alignment.

1. Remove the lower control arm that is in need of new bushings.
   

1. Set up the control arm in a press.
2. Using a impact socket of the correct length and size, press out the old bushing.
3. Install the new bushing by slowly using the press to push it into the control arm.
4. WARNINGExcessive force could cause the bushing to bend or tear so be careful.
5. Once the bushing is properly seated in the control arm, remove the arm from the press and install it on the vehicle.

SOURCE: fuse diagram for 1996 honda civic

try this link... let me know if this is what you needed... http://img530.imageshack.us/img530/8770/9600civicfuse98civicexatb2.jpg

ZJ Limited

• 17989 Answers
• Posted on Aug 25, 2009

SOURCE: 1997 honda civic firing order, 4 cylinder

1.6L Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise.



I hope help you with this, remember rated this post. Good luck.

Testimonial: "Thanks, runs like a charm, now!"

ZJ Limited

• 17989 Answers
• Posted on Dec 10, 2009

SOURCE: what is the firing order for 1994 honda civic lx

1994 Honda Civic - 1.6 liter SOHC L4 (VTEC)



Hope helped with this (remember rated this help) Good luck.

SOURCE: I am looking for the firing order on a 1996 honda

For the 1996 Honda Accord 2.2L SOHC In-Line 4-Cylinder:

Firing Order:
1-3-4-2

Cylinders:
.......(back)......
|..4...3...2...1..|
.......(front)

Distributor:
..(back)
.....4
3........2
.....1
.(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!