ALL POWER WINDOWS AND LOCKS DO NOT WORK

first is diagnosis.
you examine and test it. to see if its electrical or mech. failure.
and once discovered that follow that to logical conclusions.

1. Check the fuse that supplies the power windows.
2. If the fuse is good, then check the wiring harness that passes to the drivers door. If there's a broken wire, power will not be supplied to the windows and they won't work.

Let me know what you find.

clicking sound from the window tells me that your window is out of its track

you'll need to remove the door skin to diagnose and repair

on some vehicles there is a switch that disables lights some are on dash some are on the overhead light. if only one bulb ck bulb, if all lights could also be fuse

check your fuses

93 jeep grand cherokee limited only have ignition key and changed battery and now security lights and headlights wont quit flashing help!

pull back the rubber boot covering the wiring harness in the door jam you find damage or breakage in the harness

a brake in ur wires in the door,on a 04 grand i had the same problem,in the wire harness were the junction box is rust had broken one of the male prongs

http://www.wjjeeps.com/fuses.htm, hopefully this works if you change the fuses and you havent resolved your problem then i would take it to a mech

I have a 2000 Jeep Grand Cherokee the power windows,power seat , door would not lock , and the inside lights would stay one ..i thought it was a fuse problem but no fuses for that ... in the rubber boot between the door and frame ..the was the ground wire was split ... put a **** connector on it everything works great now ....