At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I've checked the 3rd brake light no frayed or something, I've notice theres no power in the brake light but the tail lights are working fine. anyways thanks for the 411.
I've checked the 3rd brake light no frayed or something, I've notice theres no power in the brake light but the tail lights are working fine. anyways thanks for the 411.
AnonymousMar 16, 2014
I HAVE WIRED UP TO LIGHTS AND HAVE DOUBLE CHECK THE WIRING AND WHEN ON DIM THE LAMPS FLASHI HAVE WIRED UP TO LIGHTS AND HAVE DOUBLE CHECK THE WIRING AND WHEN ON DIM THE LAMPS FLASH
You can't post conmments that contain an email address.
Check for in/out power to the brake light switch that is mounted to the upper part of the brake pedal under the dash. You should have constant power to the switch and when the pedal is pushed down, the test light should light up. If it doesn't, replace the brake light switch.Check for in/out power to the brake light switch that is mounted to the upper part of the brake pedal under the dash. You should have constant power to the switch and when the pedal is pushed down, the test light should light up. If it doesn't, replace the brake light switch.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yank the starter relay in the under dash relay box. Check for battery power on terminals 1 & 2 in the relay socket with the key turned to START. If no power, check fuses 31 and 35. If you have power on those terminals, check for ground on terminal 3 in the socket when turned to START. If no ground, the Security system isn't seeing a good signal from the clutch interlock switch or the auto transmission shift console switch. Check those out
Power flows from Fuse 35 50A to IGN switch. Start by checking that fuse. From IGN switch to starter on black/white wire. Check for battery voltage on that wire at starter. If no voltage, check for voltage on black/white wire at IGN when turned to START. If no voltage, check for good power coming into the IGN switch on the the white wire from Fuse 35
check large maxi fuse, should be in the under hood relay center. also check for burnt fusible link in small wire coming from the battery I think there might also be one it the back of the starter in a smaller wire hooked to the large post.....GOOD LUCK
DiD you say that the brake light is ON, if so the brake switch on the servo master is faulty.
you will have to check for a short in the pressure switch .
I'd go get a reading from an auto parts store!
Advance Auto Parts will usually do this for free!
Are you having any noticeable problems besides the code lights?
Hope this is helpful!
Good Luck!
when the brake light is on it usualy means one of two things. First one is parking brake is on, second is low on brake fluid. More then likely time to change brake pads or could be leak in the system.
I've checked the 3rd brake light no frayed or something, I've notice theres no power in the brake light but the tail lights are working fine. anyways thanks for the 411.
I HAVE WIRED UP TO LIGHTS AND HAVE DOUBLE CHECK THE WIRING AND WHEN ON DIM THE LAMPS FLASH
×